OEM 2005 Chevrolet Venture Spark Plug Wires

2005 Chevrolet Venture Parts Questions & Experts Answers

• Q: How to replace the Spark Plug Wires on 2005 Chevrolet Venture?

  A: Turn off the ignition before beginning Spark Plug wire replacement. You need to twist each Spark Plug boot one-half turn to free the boot before extraction while pulling only at the boot to prevent wire damage in front bank Spark Plug wires (2, 4, 6). Move the engine forward while removing Spark Plug wires from their retaining clips. The next step involves the removal of rear bank Spark Plug wires (1, 3, 5) with their retaining clips, followed by ignition coils and finally extracting wires directly from the engine compartment. During Spark Plug wire replacement always move the boot heat shields and Spark Plug wire conduit along with the retaining clips. Begin the installation process by connecting the Spark Plug wires to ignition coils then move to the rear bank spark plugs (1, 3, 5) followed by secure installation in their retaining clips. Place the engine correctly then fit Spark Plug wires (2, 4, 6) to the front bank spark plugs while securing them in retaining clips.