ChevyParts
My Garage
My Account
Cart
OEM 2005 Buick Century Coolant Reservoir
Coolant Tank Reservoir- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Coolant Reservoir found
2005 Buick Century Reservoir Tank Part Number: 10333858
$36.78 MSRP: $52.38You Save: $15.60 (30%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Reservoir, Engine Coolant Recovery; Coolant Reservoir; Recovery Tank; Reservoir
- Replaces: 10318742, 10423373
- Item Weight: 1.90 Pounds
- Item Dimensions: 3.4 x 16.8 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10333858
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Buick Century Coolant Reservoir
With a comprehensive array of OEM 2005 Buick Century Coolant Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Century Coolant Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 Buick Century Coolant Reservoir Parts Questions & Experts Answers
- Q: How to replace the coolant reservoir on 2005 Buick Century?A: Begin by relocating the Coolant Reservoir hose clamp around the radiator overflow fitting followed by the hose removal from the power distribution center and radiator overflow fitting clips. Start by removing shock tower studs' nuts then extract the coolant recovery reservoir from its lower retainers and shock tower studs where you will drain coolant into a clean container. Reinstall the coolant recovery reservoir onto the lower retainer and shock tower studs before installing shock tower studs nuts. Tighten all nuts to 3.3 nm (29 inch lbs.). Clean water lubrication of the reservoir hose precedes the hose installation at the radiator overflow fitting where the hose end faces directly against the radiator filler neck while urging the clamp to sit between the neck and the flared fitting section. When complete you should position the clamp onto the radiator overflow fitting before installing the reservoir hose to its clip at the power distribution center and filling the recovery system to standard levels.