Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
Other Name: Bracket-Engine Mount; Engine Mount Bracket; Motor Mount; Lower Bracket; Bracket, Engine Mounting
Item Weight: 1.80 Pounds
Item Dimensions: 10.8 x 4.9 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 10334474
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2005 Buick LaCrosse Submodels:
CXS | 6 Cyl 3.6 L GAS
2005 Buick LaCrosse Motor And Transmission Mount
With a comprehensive array of OEM 2005 Buick LaCrosse Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick LaCrosse Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 Buick LaCrosse Parts Questions & Experts Answers
Q: How to replace the LH Motor and Transmission Mount on 2005 Buick LaCrosse?
A: To remove the left transmission mount, lift and support the vehicle; unhook the left tire and wheel assembly and remove the left inner splash shield. Place a transmission jack under the transaxle and remove nuts (Nuts) from the transaxle bracket. Carefully lift up the transaxle assembly and turn off the transaxle mount lower nuts (nuts) that hold the assembly onto the frame, then remove the transaxle mount from the frame. For an installation, place the transaxle mount to the frame and tighten the nuts of the transaxle mount lower (Nuts) to the frame to 63 nm (46 ft. Lbs.). Lower the transaxle so that the transaxle mount studs are inserted into the transaxle bracket and then install the transaxle mount upper nuts (Nuts) and tighten them to 47 nm (35 ft. Lbs.). Lastly, pull back the transmission jack, reinstall left inner splash shield, replace the left wheel and tire assembly and bring down the vehicle.