OEM 2005 Buick LeSabre Fuel Injector

Gas Injector
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Injector found

  • 2005 Buick LeSabre Fuel Injector - 12586551
    2005 Buick LeSabre Fuel Injector Diagram - 12586551
    View related parts
    Product Specifications
    • Other Name: Injector Assembly-Sequential Multiport Fuel; Fuel Injector; Injector Kit, Fuel Injection; Injector, Fuel Injection
    • Replaces: 17113611
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 4.7 x 1.7 x 1.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 12586551
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2005 Buick LeSabre Submodels:
    • Custom, Limited | 6 Cyl 3.8 L GAS

2005 Buick LeSabre Fuel Injector

With a comprehensive array of OEM 2005 Buick LeSabre Fuel Injector, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick LeSabre Fuel Injector are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick LeSabre Fuel Injector Parts Questions & Experts Answers

  • Q: How to clean fuel injectors effectively on 2005 Buick LeSabre?
    A: All components required for Fuel Injector cleaning include fuel line shut-off adapters (J 37287) and Fuel Injector cleaner (J 35800-A) alongside 3/8 fuel line shut-off valve (J 42873-1), 5/16 return pipe shut-off valve (J 42873-2), 3/8 fuel pipe shut-off valve (J 42964-1), and 5/16 fuel pipe shut-off valve (J 42964-2). Use gm top-engine cleaner exclusively by carefully excluding its application to the fuel tank while using solutions with a maximum concentration rate at 10 percent. If the vehicle has fewer than 160 km (100 mi) on its odometer then replacing the injectors instead of cleaning them is recommended. A cleaning solution with 960 ml (32.4 oz) quantity is required and will fill two tanks from the Fuel Injector cleaner (J 35800-A). Us dealers must empty two 24 ml (0.812 oz) gm top-engine cleaner units (GM P/N 12346535) into the Fuel Injector cleaner (J 35800-A) and canadian dealers need to measure a dosage of 48 ml (1.62 oz) of top-engine cleaner (Canadian P/N 992872). For third-brand cleaning solutions you should combine 96 ml (3.24 oz) of top-engine cleaner with 864 ml (29.16 oz) of regular unleaded gasoline. Filling the injector cleaning tank requires gasoline followed by disabling the vehicle fuel pump and disconnecting the fuel feed and return line before using appropriate shut-off valves for plugging these lines. Run the engine through stalling by connecting the Fuel Injector cleaner j 35800-a to the Fuel Rail until reaching 510 kpa (75 psi) pressure. The cleaning process requires users to first reconnect both fuel lines before running the car engine for two more minutes. A test of injector balance reveals irrigation pressure changes for each injector while any deviation above 15 kpa (2 psi) demands replacement of the injector with the lowest drop. Place one ounce of port Fuel Injector cleaner gm p/n 12345104 or canadian p/n 10953467 in the fuel tank for each gallon of fuel then tell the customer to use different gasoline brands with this cleaner every 5000 km (3,000 mi) for prevention. Drive the vehicle on the road to verify that the problem has been addressed.

Related 2005 Buick LeSabre Parts