OEM 2005 Buick LeSabre Throttle Cable

Accelerator Throttle Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Cable found

  • 2005 Buick LeSabre Throttle Cable - 25654686
    2005 Buick LeSabre Throttle Cable Diagram - 25654686
    View related parts
    Product Specifications
    • Other Name: Cable Assembly-Accelerator Control; Cable; Cable, Accelerator Control
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 14.0 x 13.2 x 3.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25654686
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2005 Buick LeSabre Submodels:
    • Custom, Limited | 6 Cyl 3.8 L GAS

2005 Buick LeSabre Throttle Cable

With a comprehensive array of OEM 2005 Buick LeSabre Throttle Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick LeSabre Throttle Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick LeSabre Throttle Cable Parts Questions & Experts Answers

  • Q: How to replace the throttle cable on 2005 Buick LeSabre?
    A: The procedure to replace Throttle Cable begins with removing the left closeout/insulator panel. You should first disconnect the Throttle Cable from the accelerator pedal lever and then squeeze tangs on the Throttle Cable cover for pushing the cable thoroughly through the bulkhead. You should remove the Throttle Cable initially from its retaining clip and from the right slot on top of the washer bottle. Pull the Throttle Cable out from the Throttle Body lever then from the Throttle Cable bracket. The Throttle Cable route enters the bulkhead as part of the installation procedure before snap retainer installation. The Throttle Cable should be inserted through the slot on the accelerator pedal lever so that its end fitting snaps into position and settles flush against the accelerator pedal lever. Apply the dash panel insulator retainer onto the Throttle Cable so that the cable can lock onto the flange of the cable dash fitting. Check that the retainer fits smoothly with the dash mat. Test the full throttle motion by using the accelerator pedal and confirm unrestricted throttle movement at both limit positions. Mount the Throttle Cable onto the Throttle Body lever but let the cable fit below the lever hook. Reinstall the left closeout/insulator panel after attaching the Throttle Cable to the Throttle Cable bracket and the right slot on top of the washer bottle and securing it with the retaining clip.

Related 2005 Buick LeSabre Parts