How to replace the Air Bag Sensor for the side impact on 2005 Buick Rendezvous?

Before replacing the inflatable restraint side impact sensor, you have to disable the SIR system. Do not hit or jolt the inflatable restraint side impact sensor (SIS); ensure that it is safely fastened before power is applied to prevent SIR action or injury to the person. Disengage the center pillar lower trim and then disconnect the connector position assurance (CPA) from the yellow 2-way harness connector, the side impact sensor. Pull out the wiring harness connector from the sensor and remove the 2 fasteners that hold it in place. Take out the side impact sensor from the center pillar. Clean up the mounting surface of any type of dirt, grease, and contaminant prior to installing the new inflatable restraint side impact sensor onto the center pillar. Tighten the 2 fasteners to the sensor as tight as the torque is 10 N.m (89 lb in). Sheath the yellow 2-way harness connector to the side impact sensor and also reinstall the CPA to the yellow 2 way connector. Finally, install the center pillar lower trim and activate SIR system.

OEM 2005 Buick Rendezvous Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Bag Sensors found

View related parts
2005 Buick Rendezvous Impact Sensor, Front Driver Side
Part Number: 10368949
$21.76 MSRP: $32.39
You Save: $10.63 (33%)
Product Specifications
- Other Name: Sensor Assembly-Inflatable Restraint Front End Discriminating; Air Bag Sensor; Front Sensor; Sensor, Inflatable Restraint System
- Position: Front Driver Side
- Replaces: 10343438
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10368949
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2005 Buick Rendezvous Impact Sensor, Front Passenger Side
Part Number: 10368948
Product Specifications
- Other Name: Sensor Assembly-Inflatable Restraint Front End Discriminating; Air Bag Sensor; Front Sensor; Sensor, Inflatable Restraint System
- Position: Front Passenger Side
- Replaces: 10343439
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.4 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10368948
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2005 Buick Rendezvous Side Impact Sensor
Part Number: 10368947
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Side Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.5 x 3.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10368947
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2005 Buick Rendezvous Air Bag Sensor

With a comprehensive array of OEM 2005 Buick Rendezvous Air Bag Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Rendezvous Air Bag Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Rendezvous Parts Questions & Experts Answers

Q: How to replace the Air Bag Sensor for the side impact on 2005 Buick Rendezvous?
A: Before replacing the inflatable restraint side impact sensor, you have to disable the SIR system. Do not hit or jolt the inflatable restraint side impact sensor (SIS); ensure that it is safely fastened before power is applied to prevent SIR action or injury to the person. Disengage the center pillar lower trim and then disconnect the connector position assurance (CPA) from the yellow 2-way harness connector, the side impact sensor. Pull out the wiring harness connector from the sensor and remove the 2 fasteners that hold it in place. Take out the side impact sensor from the center pillar. Clean up the mounting surface of any type of dirt, grease, and contaminant prior to installing the new inflatable restraint side impact sensor onto the center pillar. Tighten the 2 fasteners to the sensor as tight as the torque is 10 N.m (89 lb in). Sheath the yellow 2-way harness connector to the side impact sensor and also reinstall the CPA to the yellow 2 way connector. Finally, install the center pillar lower trim and activate SIR system.