How to replace the Ignition Control Module on 2005 Buick Rendezvous?

In order to replace the Ignition Control Module, disconnect all electrical connectors from the Ignition Control Module (ICM) and record the position of the Spark Plug Wires before disconnecting them from the ignition coils. Then, undo the screws of the coil assemblies to the Ignition Control Module and pull the coils off the module. Next, remove the fasteners that hold the Ignition Control Module assembly on the engine and remove the Ignition Control Module from the bracket. Now to install, put the Ignition Control Module back on bracket, fastening the coils to the module. Replace the fasteners holding the Ignition Control Module assembly to the engine and tighten the screws to 4.5 n.m (40 lb in). Lastly, reattach the Spark Plug Wires as indicated while removing and the electrical connectors to the Ignition Control Module.

OEM 2005 Buick Rendezvous Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Control Module found

View related parts
2005 Buick Rendezvous Control Module
Part Number: 19245557
$221.80 MSRP: $455.78
You Save: $233.98 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Electronic Ignition Control (W/O Coil); Ignition Control Module; Ignition Module; Coil Module; Module; Bracket, Distributor (Also Knock Sensor); Module, Distributor (Also Knock Sensor)
- Replaces: 10489422
- Item Weight: 1.00 Pounds
- Item Dimensions: 7.8 x 4.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19245557
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS

2005 Buick Rendezvous Ignition Control Module

With a comprehensive array of OEM 2005 Buick Rendezvous Ignition Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Rendezvous Ignition Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Rendezvous Parts Questions & Experts Answers

Q: How to replace the Ignition Control Module on 2005 Buick Rendezvous?
A: In order to replace the Ignition Control Module, disconnect all electrical connectors from the Ignition Control Module (ICM) and record the position of the Spark Plug Wires before disconnecting them from the ignition coils. Then, undo the screws of the coil assemblies to the Ignition Control Module and pull the coils off the module. Next, remove the fasteners that hold the Ignition Control Module assembly on the engine and remove the Ignition Control Module from the bracket. Now to install, put the Ignition Control Module back on bracket, fastening the coils to the module. Replace the fasteners holding the Ignition Control Module assembly to the engine and tighten the screws to 4.5 n.m (40 lb in). Lastly, reattach the Spark Plug Wires as indicated while removing and the electrical connectors to the Ignition Control Module.