How to replace the MAP Sensor on 2005 Buick Rendezvous?

First off, turn OFF the ignition to replace the Manifold Absolute Pressure (MAP) sensor. You will now disconnect the MAP sensor from the bracket by unscrewing the screws that hold it in place, then you will remove the MAP sensor electric connector and the MAP inlet vacuum hose. Following the removal of the MAP sensor from the bracket, secure the new MAP sensor onto the bracket and rest the MAP inlet vacuum hose then connect the MAP sensor electrical connector. Finally, drive the screws and tighten them to 3 N.m (27 lb in), in accordance with the rules of Fastener Notice in Service Precautions.

OEM 2005 Buick Rendezvous MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2005 Buick Rendezvous M.A.P. Sensor Part Number: 12615135
$57.29 MSRP: $138.12
You Save: $80.83 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Pressure Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12581167
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12615135
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL | 6 Cyl 3.4 L GAS

2005 Buick Rendezvous MAP Sensor

With a comprehensive array of OEM 2005 Buick Rendezvous MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Rendezvous MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Rendezvous MAP Sensor Parts and Q&A

Q: How to replace the MAP Sensor on 2005 Buick Rendezvous?
A: First off, turn OFF the ignition to replace the Manifold Absolute Pressure (MAP) sensor. You will now disconnect the MAP sensor from the bracket by unscrewing the screws that hold it in place, then you will remove the MAP sensor electric connector and the MAP inlet vacuum hose. Following the removal of the MAP sensor from the bracket, secure the new MAP sensor onto the bracket and rest the MAP inlet vacuum hose then connect the MAP sensor electrical connector. Finally, drive the screws and tighten them to 3 N.m (27 lb in), in accordance with the rules of Fastener Notice in Service Precautions.