OEM 2005 Cadillac SRX Valve Stem Oil Seal

2005 Cadillac SRX Parts Questions & Experts Answers

• Q: What tools are required to service the Rocker Shaft Spring Kit and Valve Stem Oil Seal replacement on the left side on 2005 Cadillac SRX?

  A: To work on valve guide seal parts including oil seals and valve springs from the left side needs en 46106 and j 39313 tools plus en 46110 and en 46116 devices. Start by taking out the Starter motor. Setting up the en 46106 tool is necessary to stop Crankshaft movement because system reassembly would be needed if the Crankshaft shifts. Take out the camshafts first then rocker arms and then unplug the specified cylinder for the Spark Plug. Mount the j 39313 on the cylinder and join it to an air compressor. Place the en 46110 unit over the cylinder and twist its valve spring compressor nut until firm. Rephrase verbalization to remove valve keepers after positioning the en-46110 valve spring compressor above the valve. Loosen the compressor's nut and take out the valve spring retainer and valve spring. Install the en 46116 to remove the valve stem seal. Settle the valve stem seal in position using en 46116 and put the valve spring on top of it alongside the valve spring retainer. Position the en 46110 above the valve spring and apply torque to its compressor nut before placing the valve spring keepers. Disconnect the air source from j 39313 and take out both j 39313 as well as en 46110. Reassemble the spark plugs first and finish with rocker arms and camshafts. Take out the en 46106 part to block Crankshaft movement then put back the Starter engine.