Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 12565836
Valve Seals

2004-2012 GM

Customer Questions & Expert Answers (24)
GM 12565836 Valve Seals
  • Part Description
    Seal, Engine Valve; Valve Stem Seal
  • Manufacturer
    General Motors
Make sure this part fits
$4.37 MSRP: $6.83
You Save: $2.46 (37%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 12565836 Valve Seals is Ref No. 7 in the diagram below

    2006 Cadillac STS Valve Seals Diagram for 12565836
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 12565836

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number12565836
    Part DescriptionSeal, Engine Valve; Valve Stem Seal
    Item Dimensions1.6 x 1.4 x 0.9 inches
    Item Weight0.60 Pounds
    ConditionNew
    Require Quantity8
    ManufacturerGeneral Motors
    SKU12565836
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2010, 2005-2008 Buick LaCrosseCX, CXL, CXS6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
    2004-2006 Buick RendezvousCX, CXL, CXL Plus, Ultra6 Cyl 3.6 L GAS
    2004-2008 Cadillac CTSBase6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS
    2004-2010 Cadillac SRXBase, Luxury, Performance, Premium6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
    2005-2010 Cadillac STSBase, Platinum6 Cyl 3.6 L GAS
    2010 Chevrolet CamaroLS, LT6 Cyl 3.6 L GAS
    2008-2010 Chevrolet EquinoxLT, LTZ, Sport6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
    2008-2012 Chevrolet MalibuLT, LTZ6 Cyl 3.6 L GAS
    2010 GMC TerrainSLE, SLT6 Cyl 3.0 L GAS
    2007-2009 Pontiac G6GTP, GXP6 Cyl 3.6 L GAS
    View More

  • Customer Questions & Expert Answers

    Q:
    Is this 12565836 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12565836 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Rocker Shaft Spring Kit and Valve Stem Oil Seal on the left side on Cadillac SRX? Posted by Customer
    A:
    The initial step for replacing the left-side valve stem oil seal and valve spring requires you to remove the rocker arms and Starter motor. The procedure consists of installing the en-46106 - flywheel holding tool for crankshaft control and subsequently removing the Spark Plug from its cylinder placement and attaching the en-39313 - spark plug port adapter to compressed air. Position the en-46110 - on-vehicle valve spring compressor above the targeted cylinder then tighten its nut. Use the valve spring compressor on the left side to remove valve keepers and loosen the compressor nut and retrieve the valve spring retainer and valve spring. The en-46116 - valve stem seal remover/installer device provides the tool necessary for removing and installing valve stem seals. Install new valve stem seal with en-46116 - remover/installer then put in valve spring and retainer. Begin by tightening the en-46110 - compressor's nut before reattaching valve spring keepers. Disconnect the compressor and remove the en-39313 - adapter from the air source before taking out the adapter. To finish the process reinstall both the spark plugs and rocker arms while removing the en-46106 - tool before fitting the Starter motor.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the valve stem oil seal and valve spring on the right side for the 2008 Buick LaCrosse? Posted by Customer
    A:
    First, remove the starter motor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    How do you hold the valves in place during the process for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Insert the Spark Plug Port Adapter (J22794) into the spark plug port and apply compressed air.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    What are the final steps after completing the installation for the 2010 Buick LaCrosse? Posted by Customer
    A:
    Remove the compressor, disconnect the J-39313 from the air source, and take out the adapter. Finally, reinstall the spark plugs, rocker arms, and starter motor, and remove the EN-46106 tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    How do you remove the valve stem seal for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Use the EN46116 to remove the valve stem seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    What should be done after installing the EN 46106 for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Remove the camshafts and rocker arms.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    What tools are required for servicing and repairing the left valve stem oil seal and valve spring for the 2005 Cadillac CTS? Posted by Customer
    A:
    The required tools are EN 46106 Flywheel Holding Tool, EN 46110 On-Vehicle Valve Spring Compressor, EN 46116 Valve Stem Seal Remover/Installer, and J39313 Spark Plug Port Adapter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    What tools are required to service and repair the valve stem oil seal and valve spring for the 2005 Cadillac CTS? Posted by Customer
    A:
    The required tools are EN 46106 (Flywheel Holding Tool), EN 46110 (On-Vehicle Valve Spring Compressor), EN 46116 (Valve Stem Seal Remover/Installer), and J39313 (Spark Plug Port Adapter).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    How do you remove the valve stem seal for the 2006 Cadillac CTS? Posted by Customer
    A:
    Use the EN 46116 (Valve Stem Seal Remover/Installer) to remove the valve stem seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    What should be removed after the starter motor for the 2006 Cadillac SRX? Posted by Customer
    A:
    Next, remove the camshafts and rocker arms, followed by the spark plug from the applicable cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    How do you prepare to remove the valve spring for the 2008 Cadillac CTS? Posted by Customer
    A:
    Position the EN 46110 (On-Vehicle Valve Spring Compressor) above the applicable cylinder and tighten its valve spring compressor nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    What tool is used to connect to the cylinder after removing the spark plug for the 2007 Cadillac CTS? Posted by Customer
    A:
    Install the J 39313 (Spark Plug Port Adapter) into the cylinder and connect it to a compressed air source.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    How is the new valve stem seal installed for the 2007 Cadillac SRX? Posted by Customer
    A:
    Install a seal protector over the valve stem, then use the J 38820 to install the new valve stem seal with a twisting motion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    What is the first step to replace the valve stem oil seal and valve spring on the right side for the 2010 Cadillac SRX? Posted by Customer
    A:
    First, remove the rocker arms and the starter motor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    What tool is used to connect the cylinder to a compressed air source for the 2009 Cadillac STS? Posted by Customer
    A:
    The J 39313 (Spark Plug Port Adapter).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    How do you prepare the cylinder for valve spring replacement for the 2005 Cadillac SRX? Posted by Customer
    A:
    Install the J 39313 to the cylinder and connect it to a compressed air source.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    How is the new valve stem seal installed for the 2005 Cadillac STS? Posted by Customer
    A:
    Use the J38820 to install the new valve stem seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    What is the installation process for the new valve stem seal for the 2010 Chevrolet Camaro? Posted by Customer
    A:
    Use the EN 46116 to install the new valve stem seal, followed by the valve spring and retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    What should be done after installing the Spark Plug Port Adapter for the 2008 Chevrolet Equinox? Posted by Customer
    A:
    Apply compressed air to hold the valves in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    What should be done after installing the valve keys for the 2009 Chevrolet Equinox? Posted by Customer
    A:
    Secure them with grease if needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    How do you install the new valve seal for the 2009 Chevrolet Malibu? Posted by Customer
    A:
    Use the Valve Guide Seal Remover (J 36017) to remove the old valve seal, then install a new valve seal with the same tool, ensuring it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    What should be done after installing the valve spring for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Compress the valve spring again and install the valve spring keepers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    Q:
    What is the final step if the Flywheel Holding Tool was used for the 2010 GMC Terrain? Posted by Customer
    A:
    Remove the Flywheel Holding Tool (EN-43653) and reinstall the starter if it was removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Valve Stem Oil Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 12565836, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 12565836 Valve Seals. It is sometimes referred to as GM Valve Stem Oil Seal. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 12565836 Valve Seals. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery