How to replace the fuel pressure sensor on 2005 Cadillac STS?

Raise and support the vehicle in order to remove the fuel tank pressure sensor. Detach the electrical connector and take the sensor out of the EVAP canister, recording the features of the alignment. To install, simply place the sensor on the canister until it clips in, reconnect the electrical connector and lower the vehicle.

OEM 2005 Cadillac STS Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
2005 Cadillac STS Fuel Pressure Regulator, Passenger Side Part Number: 16238399
$54.17 MSRP: $101.06
You Save: $46.89 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Regulator; Sensor, Early Fuel Evaporation; Fuel Gauge Sending Unit; Tank Pressure Sensor
- Position: Passenger Side
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16238399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2005 Cadillac STS Fuel Pressure Sensor

With a comprehensive array of OEM 2005 Cadillac STS Fuel Pressure Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac STS Fuel Pressure Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Cadillac STS Fuel Pressure Sensor Parts and Q&A

Q: How to replace the fuel pressure sensor on 2005 Cadillac STS?
A: Raise and support the vehicle in order to remove the fuel tank pressure sensor. Detach the electrical connector and take the sensor out of the EVAP canister, recording the features of the alignment. To install, simply place the sensor on the canister until it clips in, reconnect the electrical connector and lower the vehicle.