ChevyParts
My Garage
My Account
Cart
OEM 2005 Cadillac XLR Wiper Arm
Windshield Wiper Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Wiper Arms found
Product Specifications- Other Name: Arm, Windshield Wiper Arm
- Position: Passenger Side
- Item Weight: 1.70 Pounds
- Item Dimensions: 27.3 x 3.2 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10436442
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Arm, Windshield Wiper Arm
- Position: Driver Side
- Item Weight: 1.40 Pounds
- Item Dimensions: 24.4 x 3.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10436443
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Wiper, Windshield Wiper Blade
- Position: Passenger Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 21.4 x 1.1 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88987072
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Wiper, Windshield Wiper Blade
- Item Weight: 3.10 Pounds
- Item Dimensions: 21.3 x 1.1 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88987071
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Cadillac XLR Wiper Arm
With a comprehensive array of OEM 2005 Cadillac XLR Wiper Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac XLR Wiper Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 Cadillac XLR Parts Questions & Experts Answers
- Q: How to replace the wiper arm on 2005 Cadillac XLR?A: After turning the ignition to accy and selecting delay on the Wiper Switch you can begin to replace the Wiper Arm. After positioning the wiper arms in the mid-wipe zone switch off the ignition. The windshield will receive a strip of masking tape at the Wiper Blade tips to serve as a guide during reassembly. First disconnect the washer hose from the air inlet grille panel and afterward remove the Wiper Arm nut cover and Wiper Arm nut . Begin by holding the Wiper Arm at its hinged joint then push and pull the Wiper Arm toward the windshield to loosen it from the wiper shaft before removal. Prior to installation connect the Wiper Blade to the Wiper Arm before checking for wiper transmission shaft and Wiper Arm splines corrosion that requires cleaning if observed. Secure the Wiper Blade tip at its designated marks on the windshield that masking tape indicates before putting the Wiper Arm onto the wiper transmission splined shaft. Drive the Wiper Arm with the Wiper Arm nut to 29 n.m (21 lb ft) torque and finally install the Wiper Arm nut cover. After reconnecting the washer hose to the air inlet grille panel users should remove masking tape from the windshield before inspecting wiper functionality.
Related 2005 Cadillac XLR Parts
2005 Cadillac XLR Bumper
2005 Cadillac XLR Dash Panel Vent Portion Covers
2005 Cadillac XLR Dash Panels
2005 Cadillac XLR Door Armrest
2005 Cadillac XLR Floor Pan
2005 Cadillac XLR Hood Latch
2005 Cadillac XLR Sunroof Cable
2005 Cadillac XLR Trunk Lid Lift Support
2005 Cadillac XLR Washer Pump
2005 Cadillac XLR Washer Reservoir
2005 Cadillac XLR Windshield Wiper
2005 Cadillac XLR Wiper Blade