How to replace the instrument panel (I/P) dimmer switch on 2005 Chevrolet Classic?

In order to substitute the dimmer switch, deactivate the SIR system. Take off the trim plate on the carrier and unscrew the electrical connectors. Grab the holding tabs and a push up the dimmer switch. To install, position and push the new switch into place, re-connect the connectors and re-fit the trim plate. Lastly, activate the SIR system.

OEM 2005 Chevrolet Classic Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

View related parts
2005 Chevrolet Classic Multifunction Switch Part Number: 19244094
$21.57 MSRP: $32.11
You Save: $10.54 (33%)
Product Specifications
- Other Name: Switch Assembly, Turn Signal, Headlamp, Wiper & Washer; Multi Purpose Combination Switch; Switch, Headlamp/Fog Lamp/Turn Signal; Windshield Wiper Control; Turn Signal Lamp; Headlamp Dimmer
- Replaces: 22661036, 22602262, 22676853
- Item Weight: 0.90 Pounds
- Item Dimensions: 18.4 x 7.9 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244094
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Classic Submodels:
- Base, LS | 4 Cyl 2.2 L GAS

2005 Chevrolet Classic Dimmer Switch

With a comprehensive array of OEM 2005 Chevrolet Classic Dimmer Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Classic Dimmer Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Classic Dimmer Switch Parts and Q&A

Q: How to replace the instrument panel (I/P) dimmer switch on 2005 Chevrolet Classic?
A: In order to substitute the dimmer switch, deactivate the SIR system. Take off the trim plate on the carrier and unscrew the electrical connectors. Grab the holding tabs and a push up the dimmer switch. To install, position and push the new switch into place, re-connect the connectors and re-fit the trim plate. Lastly, activate the SIR system.