Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2005 Chevrolet Cobalt A/C Condenser

Air Conditioning Condenser
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Condenser found

  • 2005 Chevy Cobalt A/C Condenser - 20841583
    2005 Chevy Cobalt A/C Condenser Diagram - 20841583
    View related parts

    2005 Chevrolet Cobalt Condenser

    Part Number: 20841583
    Product Specifications
    • Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser A/C; Condenser, A/C Condenser
    • Replaces: 22696030
    • Item Weight: 5.00 Pounds
    • Item Dimensions: 39.8 x 7.3 x 23.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 20841583
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2005 Chevrolet Cobalt Submodels:
    • Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2005 Chevrolet Cobalt A/C Condenser

With a comprehensive array of OEM 2005 Chevrolet Cobalt A/C Condenser, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Cobalt A/C Condenser are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Cobalt Parts Questions & Experts Answers

  • Q: How to replace the A/C Condenser on 2005 Chevrolet Cobalt?
    A: To replace the condenser, first, recover refrigerant and raise, support the vehicle. The compressor hose should be removed from the condenser, followed by the tube from the condenser and then the condenser bolts. Push the condenser downward in order to disengage the upper mounting tabs from the Radiator and remove the right and left Radiator side baffles. In case you're replacing the condenser, you should put the mentioned amount of pag oil straight into it. Next, insert the right and left Radiator side baffles, slide up the condenser to lock the upper mounting tabs into the Radiator, and install the condenser bolts and tighten to 10 n.m (88 lb in). Place the compressor hose to the condenser with a new seal washer with a tightening of the bolt to 20 n.m (15 lb ft) and thereafter install the condenser tube with a new seal washer at the same time tighten (bolt at 20 N.m /15 lb ft). Lower the vehicle, evacuate and charge the refrigerant system, and finally use the halogen leak detector (J 39400-A) to test the fittings for leaks.

Related 2005 Chevrolet Cobalt Parts

Alternate Year Models

+
2006 Chevrolet Cobalt A/C Condenser