How to replace the door emblem/nameplate on 2005 Chevrolet Colorado?

Replace the door panel emblem on your Colorado by obtaining a Heat Gun (J 25070) and 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Secure the door area with tape to keep the emblem safe while you position it. Heat the emblem/nameplate surface using a Heat Gun J 25070 kept 152 mm away from the area for 30 seconds while moving it in circular motions. Use a plastic tool to delicately take off the emblem/nameplate from its position. Clear away all residue from its edges and the surface where it lay through the use of adhesive remover. Clean the door panel surface using varnish makers and painters (VMP) naptha product. Position the emblem at marks 166 mm (6.54 in) below and 117.4 mm (4.62 in) in front of the door bottom when no marks exist. Heat the door surface with the Heat Gun to reach at least 21°C (70°F) before separating the emblem/nameplate backing on its front part. After placing the emblem/nameplate on the door panel you should use your hands to roll it firmly against the panel as you peel off the backing. Determine proper bond of emblem/nameplate before removing tape that covered the door panel.

OEM 2005 Chevrolet Colorado Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Emblems found

View related parts
2005 Chevrolet Colorado Nameplate, Outer Part Number: 15045622
$94.54 MSRP: $140.71
You Save: $46.17 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Outer
- Item Weight: 0.40 Pounds
- Item Dimensions: 16.8 x 1.4 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15045622
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
View related parts
2005 Chevrolet Colorado Emblem, Front Part Number: 10357171
$117.32 MSRP: $175.40
You Save: $58.08 (34%)
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation; Emblem, Front Bumper
- Position: Front
- Replaces: 15199885
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.9 x 3.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10357171
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 Chevrolet Colorado Nameplate, Outer Part Number: 10366203
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Outer
- Item Weight: 0.30 Pounds
- Item Dimensions: 10.4 x 0.9 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10366203
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Colorado Submodels:
- LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2005 Chevrolet Colorado Emblem

With a comprehensive array of OEM 2005 Chevrolet Colorado Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Colorado Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Colorado Emblem Parts and Q&A

Q: How to replace the door emblem/nameplate on 2005 Chevrolet Colorado?
A: Replace the door panel emblem on your Colorado by obtaining a Heat Gun (J 25070) and 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Secure the door area with tape to keep the emblem safe while you position it. Heat the emblem/nameplate surface using a Heat Gun J 25070 kept 152 mm away from the area for 30 seconds while moving it in circular motions. Use a plastic tool to delicately take off the emblem/nameplate from its position. Clear away all residue from its edges and the surface where it lay through the use of adhesive remover. Clean the door panel surface using varnish makers and painters (VMP) naptha product. Position the emblem at marks 166 mm (6.54 in) below and 117.4 mm (4.62 in) in front of the door bottom when no marks exist. Heat the door surface with the Heat Gun to reach at least 21°C (70°F) before separating the emblem/nameplate backing on its front part. After placing the emblem/nameplate on the door panel you should use your hands to roll it firmly against the panel as you peel off the backing. Determine proper bond of emblem/nameplate before removing tape that covered the door panel.