How to replace the door emblem/nameplate (XTREME) on 2006 Chevrolet Colorado?

Use a Heat Gun (J 25070) to remove the door emblem/nameplate (XTREME). Prepare with 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Start by placing tape to secure the door emblem for protection and positioning. Heat the emblem/nameplate at 152 mm distance with the Heat Gun J 25070 in circular motion for 30 seconds. Use a plastic flat blade to take out the door emblem and clean its surface and backplate with 3M adhesive remover. Wipe the door surface with varnish makers and painters naptha. Measure and apply tape following these specifications: set the front of the door at 145.0 mm (5.70 in) from the emblem/nameplate and bottom of the door at 165.0 mm (6.50 in) to the front with 28.0 mm (1.11 in) from the feature line to the emblem/nameplate when the location is unmarked. Start heating the door surface with the Heat Gun (J 25070) until it reaches 21°C (70°F) but avoid placing the emblem/nameplate tape directly on the heated surface. Press the uncovered front part of the emblem onto the door panel until the backing fully sticks to its surface. Press and roll the emblem/nameplate to guarantee it sticks well and then test the bond strength. Completing the installation by taking off the tape from around the door emblem.

OEM 2006 Chevrolet Colorado Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Emblems found

View related parts
2006 Chevrolet Colorado Nameplate, Outer
Part Number: 15045622
$92.68 MSRP: $137.94
You Save: $45.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Outer
- Item Weight: 0.40 Pounds
- Item Dimensions: 16.8 x 1.4 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15045622
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
View related parts
2006 Chevrolet Colorado Nameplate, Rear
Part Number: 15805322
$103.76 MSRP: $154.43
You Save: $50.67 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 19.8 x 1.9 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15805322
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Colorado Emblem
Part Number: 84689784
$11.20 MSRP: $16.67
You Save: $5.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door; Decal; Nameplate; Emblem, Cab, Load Carrier, Rear End, Door, Quarter Panel, Fender, Rocker Panel, Side Step.
- Replaces: 15223483, 15223484
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84689784
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Colorado Emblem, Front
Part Number: 10357171
$117.32 MSRP: $175.40
You Save: $58.08 (34%)
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation; Emblem, Front Bumper
- Position: Front
- Replaces: 15199885
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.9 x 3.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10357171
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Colorado Nameplate, Outer
Part Number: 10366203
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Outer
- Item Weight: 0.30 Pounds
- Item Dimensions: 10.4 x 0.9 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10366203
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Colorado Submodels:
- LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2006 Chevrolet Colorado Emblem

With a comprehensive array of OEM 2006 Chevrolet Colorado Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Colorado Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Colorado Emblem Parts Questions & Experts Answers

Q: How to replace the door emblem/nameplate (XTREME) on 2006 Chevrolet Colorado?
A: Use a Heat Gun (J 25070) to remove the door emblem/nameplate (XTREME). Prepare with 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Start by placing tape to secure the door emblem for protection and positioning. Heat the emblem/nameplate at 152 mm distance with the Heat Gun J 25070 in circular motion for 30 seconds. Use a plastic flat blade to take out the door emblem and clean its surface and backplate with 3M adhesive remover. Wipe the door surface with varnish makers and painters naptha. Measure and apply tape following these specifications: set the front of the door at 145.0 mm (5.70 in) from the emblem/nameplate and bottom of the door at 165.0 mm (6.50 in) to the front with 28.0 mm (1.11 in) from the feature line to the emblem/nameplate when the location is unmarked. Start heating the door surface with the Heat Gun (J 25070) until it reaches 21°C (70°F) but avoid placing the emblem/nameplate tape directly on the heated surface. Press the uncovered front part of the emblem onto the door panel until the backing fully sticks to its surface. Press and roll the emblem/nameplate to guarantee it sticks well and then test the bond strength. Completing the installation by taking off the tape from around the door emblem.