How to replace the endgate emblem/nameplate on 2007 Chevrolet Colorado?

You need two tools to install the endgate emblem on your Canyon: Heat Gun (J 25070) and 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Place tape first on the tailgate emblem as a shield and position guide. Heat the emblem/nameplate using the Heat Gun (J 25070) at 152 mm (6 in) distance while moving it in a circular motion for 30 seconds. Use a plastic tool to detach the emblem/nameplate while you apply the adhesive remover to both surfaces of the tailgate panel and the back of the emblem/nameplate. Wipe the tailgate with naphtha and varnish makers and painters materials. Start by marking the area if no drawings exist on the tailgate. To install the emblem/nameplate correctly position it 59.5 mm (2.34 in) from the tailgate edge, 12.1 mm (0.48 in) from bottom, 5.1 mm (0.2 in) from bottom and 59.4 mm (2.34 in) from edge. Heat the tailgate with the Heat Gun (J 25070) until the surface reaches 21°C (70°F) but stay away from the emblem/nameplate's backing film. Press the front end of the emblem/nameplate onto the tailgate after having removed the backing from it. Press the emblem/nameplate carefully over the surface to fix it properly then check for adherence before removing the tape from the surrounding area.

OEM 2007 Chevrolet Colorado Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Emblems found

View related parts
2007 Chevrolet Colorado Nameplate, Rear
Part Number: 15805322
$103.76 MSRP: $154.43
You Save: $50.67 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 19.8 x 1.9 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15805322
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Nameplate, Rear
Part Number: 15869661
$88.37 MSRP: $131.53
You Save: $43.16 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.2 x 18.9 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15869661
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- LT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Emblem
Part Number: 84689784
$11.20 MSRP: $16.67
You Save: $5.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door; Decal; Nameplate; Emblem, Cab, Load Carrier, Rear End, Door, Quarter Panel, Fender, Rocker Panel, Side Step.
- Replaces: 15223483, 15223484
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84689784
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Emblem, Front
Part Number: 10357171
$117.32 MSRP: $175.40
You Save: $58.08 (34%)
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation; Emblem, Front Bumper
- Position: Front
- Replaces: 15199885
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.9 x 3.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10357171
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Nameplate, Outer
Part Number: 10366203
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Outer
- Item Weight: 0.30 Pounds
- Item Dimensions: 10.4 x 0.9 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10366203
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2007 Chevrolet Colorado Emblem

With a comprehensive array of OEM 2007 Chevrolet Colorado Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Colorado Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Colorado Emblem Parts Questions & Experts Answers

Q: How to replace the endgate emblem/nameplate on 2007 Chevrolet Colorado?
A: You need two tools to install the endgate emblem on your Canyon: Heat Gun (J 25070) and 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Place tape first on the tailgate emblem as a shield and position guide. Heat the emblem/nameplate using the Heat Gun (J 25070) at 152 mm (6 in) distance while moving it in a circular motion for 30 seconds. Use a plastic tool to detach the emblem/nameplate while you apply the adhesive remover to both surfaces of the tailgate panel and the back of the emblem/nameplate. Wipe the tailgate with naphtha and varnish makers and painters materials. Start by marking the area if no drawings exist on the tailgate. To install the emblem/nameplate correctly position it 59.5 mm (2.34 in) from the tailgate edge, 12.1 mm (0.48 in) from bottom, 5.1 mm (0.2 in) from bottom and 59.4 mm (2.34 in) from edge. Heat the tailgate with the Heat Gun (J 25070) until the surface reaches 21°C (70°F) but stay away from the emblem/nameplate's backing film. Press the front end of the emblem/nameplate onto the tailgate after having removed the backing from it. Press the emblem/nameplate carefully over the surface to fix it properly then check for adherence before removing the tape from the surrounding area.