How to replace the front side door emblem/nameplate on 2008 Chevrolet Colorado?

You need a Heat Gun (J 25070) and the 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501) to repair the front side door emblem on a Colorado. Start your work by wrapping tape near the door emblem to keep it safe and in position. Use the Heat Gun (J 25070) to heat the emblem/nameplate at 152 mm (6 inches) away for 30 seconds by rotating it in circles. Use a plastic tool to carefully take off the emblem/nameplate together with all the adhesive left on both the door panel and back of the emblem/nameplate. Clean the door surface with liquid VMP mix made for varnishes and painting. Mark the location with tape at 166 mm (6.54 inches) down and 117.4 mm (4.62 inches) across from the door bottom to install the emblem/nameplate. Warm the door panel with the Heat Gun to achieve at least 70°F (21°C) temperature without touching the adhesive backing. Press the emblem/nameplate front section directly onto the door panel by removing its backing while you keep removing the other part. Press and roll the emblem/nameplate to secure it properly before inspecting for good bonding and then removing the protective tape around the door emblem.

OEM 2008 Chevrolet Colorado Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Emblems found

View related parts
2008 Chevrolet Colorado Nameplate, Rear
Part Number: 15805322
$103.76 MSRP: $154.43
You Save: $50.67 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 19.8 x 1.9 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15805322
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Colorado Nameplate, Rear
Part Number: 15869661
$88.37 MSRP: $131.53
You Save: $43.16 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.2 x 18.9 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15869661
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- LT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Colorado Emblem
Part Number: 84689784
$11.20 MSRP: $16.67
You Save: $5.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door; Decal; Nameplate; Emblem, Cab, Load Carrier, Rear End, Door, Quarter Panel, Fender, Rocker Panel, Side Step.
- Replaces: 15223483, 15223484
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84689784
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Colorado Emblem, Front
Part Number: 10357171
$117.32 MSRP: $175.40
You Save: $58.08 (34%)
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation; Emblem, Front Bumper
- Position: Front
- Replaces: 15199885
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.9 x 3.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10357171
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Colorado Nameplate, Outer
Part Number: 10366203
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Outer
- Item Weight: 0.30 Pounds
- Item Dimensions: 10.4 x 0.9 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10366203
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2008 Chevrolet Colorado Emblem

With a comprehensive array of OEM 2008 Chevrolet Colorado Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Colorado Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Colorado Emblem Parts Questions & Experts Answers

Q: How to replace the front side door emblem/nameplate on 2008 Chevrolet Colorado?
A: You need a Heat Gun (J 25070) and the 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501) to repair the front side door emblem on a Colorado. Start your work by wrapping tape near the door emblem to keep it safe and in position. Use the Heat Gun (J 25070) to heat the emblem/nameplate at 152 mm (6 inches) away for 30 seconds by rotating it in circles. Use a plastic tool to carefully take off the emblem/nameplate together with all the adhesive left on both the door panel and back of the emblem/nameplate. Clean the door surface with liquid VMP mix made for varnishes and painting. Mark the location with tape at 166 mm (6.54 inches) down and 117.4 mm (4.62 inches) across from the door bottom to install the emblem/nameplate. Warm the door panel with the Heat Gun to achieve at least 70°F (21°C) temperature without touching the adhesive backing. Press the emblem/nameplate front section directly onto the door panel by removing its backing while you keep removing the other part. Press and roll the emblem/nameplate to secure it properly before inspecting for good bonding and then removing the protective tape around the door emblem.