Other Name: Emblem, Radiator Grille And Front End Ornamentation; Emblem, Front Bumper
Position: Front
Replaces: 15199885
Item Weight: 1.30 Pounds
Item Dimensions: 8.9 x 3.6 x 3.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 10357171
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
2009 Chevrolet Colorado Emblem
With a comprehensive array of OEM 2009 Chevrolet Colorado Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Colorado Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 Chevrolet Colorado Emblem Parts and Q&A
Q: How to replace the front side door emblem/nameplate on 2009 Chevrolet Colorado?
A: Before working on the side door emblem/nameplate you need to apply tape at the correct areas to shield the panel from scratches while preparing for installation. Heat the surface 152 mm (6 inches) away from a J 25070 heat gun while rotating the gun in circles for 30 seconds. Use a plastic tool to gently lift off the emblem/nameplate to stop harming the paint surface. Wipe the door panel surface and the brand plate with a scotch brite 3M(TM) molding adhesive remover disk 3M(TM) P/N 07501 before applying VMP naphtha to clean the door surface. Maintain tape positioning at 166 mm (6.54 in) from the door bottom and 117.4 mm (4.62 in) from the front edge to place the emblem/nameplate. Heat the door surface to 21°C (70°F) minimum with the J 25070 gun until the area is warm enough to avoid touching the backing of the emblem. Press the emblem/nameplate onto the door panel from its front end without backing in place. Grip the exposed side to fix the emblem properly. Then hand roll the installation area to achieve secure attachment. Evaluate the bond of the emblem/nameplate before you remove its protective tape from the surrounding door area.