OEM 2005 Chevrolet Corvette Harmonic Balancer

Engine Harmonic Balancer
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Harmonic Balancer found

  • 2005 Chevy Corvette Harmonic Balancer - 12675715
    2005 Chevy Corvette Harmonic Balancer Diagram - 12675715
    View related parts

    2005 Chevrolet Corvette Crank Pulley

    Part Number: 12675715
    $228.33 MSRP: $359.25
    You Save: $130.92 (37%)
    ADD TO CART
    Product Specifications
    • Other Name: Pulley; Harmonic Balancer; Vibration Damper; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
    • Replaces: 12598831, 12635652, 12583637
    • Item Weight: 8.90 Pounds
    • Item Dimensions: 14.6 x 14.4 x 7.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 12675715
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2005 Chevrolet Corvette Submodels:
    • Base | 8 Cyl 6.0 L GAS

2005 Chevrolet Corvette Harmonic Balancer

With a comprehensive array of OEM 2005 Chevrolet Corvette Harmonic Balancer, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Corvette Harmonic Balancer are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Corvette Harmonic Balancer Parts Questions & Experts Answers

  • Q: How to replace the harmonic balancer on 2005 Chevrolet Corvette?
    A: The needed tools for this replacement include crankshaft balancer remover (J41816), crankshaft end protector (J41816-2), flywheel holding tool (J42386-A) and crankshaft balancer and sprocket installer (J41665). The initial procedure involves removing the air conditioning belt along with power steering hardware and Starter motor before proceeding to eliminate the right transmission cover and bolt assembly. Prior to removal of the crankshaft balancer on manual transmission vehicles users must record its starting position because the part does not have positioning keys. Note down all existing balance weights before installing them properly in the new balancer unit. The crankshaft balancer remover (J41816) together with the crankshaft end protector (J41816-2) enables technicians to remove the crankshaft balancer (138) whilst keeping the crankshaft balancer bolt (139) for later installment. The installation process requires stretching the new balancer perpendicular to the crankshaft before using the crankshaft balancer and sprocket installer (J41665) to perform the installation. The technicians should use a torque wrench to tighten the bolt used for the crankshaft balancer up to 330 nm (240 ft. Lbs.) before removing it. Tighten the new crankshaft balancer bolt (139) through two stages beginning with 50 nm (37 ft. Lbs.) then reaching 140 degrees while using the j45059. The installation process ends when you reinstall the flywheel holding tool (J42386-A) and the other components starting with the Starter motor followed by the power steering gear and ending with the a/c Drive Belt prior to performing the crankshaft position system variation learn procedure.

Related 2005 Chevrolet Corvette Parts