OEM 2005 Chevrolet SSR Dipstick Tube

2005 Chevrolet SSR Parts Questions & Experts Answers

• Q: How to replace the Dipstick Tube and oil level indicator on 2005 Chevrolet SSR?

  A: Start your replacement of the oil level indicator tube and sensor by cleaning the surrounding area using compressed air. Use tools to remove both the oil level indicator from the tube along with its bolt. Higher elevation of the vehicle might be required to enable working on the oil level tube. Check for cuts or damage on the o-ring seal of the engine block when you remove the oil level indicator tube from its position upon access. Reuse the o-ring if it remains unharmed. It is possible to remove the o-ring seal from the tube based on necessity. Clean engine oil should be used to lubricate the o-ring seal before its installation onto the oil level indicator tube. You should position the oil level indicator tube behind the Exhaust Manifold prior to raising and supporting the vehicle. Place the oil indicator tube inside the block while making sure the collar remains at the same level as the block surface. The oil level indicator tube bolt needs to be added to its position and connected with torque at 25 nm (18 ft. Lbs.). Attach the oil level indicator to the tube as the last step.