How to replace the front door striker on 2005 Chevrolet SSR?

The first step to install a new front door striker requires unscrewing the door striker attachment then removing both shims and the door striker. Add the shim striker to the installation and tighten it with screws. You should check the door alignment by closing the door after which you can open the door while tightening screws to 24 N.m (18 lb ft).

OEM 2005 Chevrolet SSR Door Striker

Door Lock Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Strikers found

View related parts
2005 Chevrolet SSR Striker
Part Number: 15104675
Product Specifications
- Other Name: Striker, End Gate Lock
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.2 x 4.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15104675
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2005 Chevrolet SSR Striker
Part Number: 25767961
Product Specifications
- Other Name: Striker, Door Lock Striker
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.0 x 2.6 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25767961
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2005 Chevrolet SSR Door Striker

With a comprehensive array of OEM 2005 Chevrolet SSR Door Striker, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet SSR Door Striker are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet SSR Door Striker Parts Questions & Experts Answers

Q: How to replace the front door striker on 2005 Chevrolet SSR?
A: The first step to install a new front door striker requires unscrewing the door striker attachment then removing both shims and the door striker. Add the shim striker to the installation and tighten it with screws. You should check the door alignment by closing the door after which you can open the door while tightening screws to 24 N.m (18 lb ft).