Make sure this part fits

GM 25767961
Striker

2003-2011 GM

Customer Questions & Expert Answers (13)
GM 25767961 Striker
  • Part Description
    Striker, Door Lock Striker
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    2005 Cadillac DeVilleBase, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2004-2009 Chevrolet TrailblazerBase, LS, LT, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2004-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25767961 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25767961 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front door striker on Chevrolet SSR? Posted by Customer
    A:
    Start by removing screws that hold the door striker before uninstalling the strikers along with their shims. Next install the shim striker using screws and tighten them to 24 N.m (18 lb ft). After that install the shim striker then fasten it securely with screws. Close the door while checking for proper alignment of the door striker before opening the door and screw tightening at 24 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the front door striker for the 2004 Buick Rainier? Posted by Customer
    A:
    Open the door and mark the position of the striker on the door frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step regarding the bolts for the 2007 Buick Rainier? Posted by Customer
    A:
    Ensure to fully tighten the bolts to 25 N.m (18 lb ft) as indicated in the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done if the rear side impact inflator module was removed for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Reinstall the rear side impact inflator module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after removing the bolts for the 2009 Cadillac DTS? Posted by Customer
    A:
    Take out the striker and spacer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the front door striker for the 2008 Cadillac DTS? Posted by Customer
    A:
    Observe the striker location and the number of spacers before removing the door striker bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the front door striker for the 2007 Cadillac DTS? Posted by Customer
    A:
    Observe the striker location and the number of spacers before removing the door striker bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How should the spacer and striker be positioned for the 2006 Cadillac DTS? Posted by Customer
    A:
    Position the spacer and striker against the lock pillar with the narrow part of the striker facing outward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after removing the screws for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Take out the shims and the door striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be removed after marking the position of the striker for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the 2 bolts (W705134) that secure the striker to the door frame, then take out the striker and spacer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after removing the trim cover for the 2004 GMC Envoy? Posted by Customer
    A:
    Take out the bolts that secure the upper side access door striker to the body and then remove the striker itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step in the process for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Close the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Striker 25767961 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25767961 Striker is available in the market under the name GM Door Striker. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25767961 Striker fits certain Chevrolet SSR, Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Cadillac DTS, DeVille and Buick Rainier models.
The original GM component designated by manufacturer part number 25767961 maintains top performance when functioning as the Striker, Door Lock Striker unit at its Rear. The component 25767961 is constructed from durable material and its dimensions span 3.0 x 2.6 x 1.7 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 25767961 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 25767961. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.