How to replace the Knock Sensor (KS) on the left side on 2005 Chevrolet SSR?

First you must lift the vehicle before beginning KS left side replacement. Begin by removing the electrical connector from the knock sensor then unscrew the retaining bolt holding down the knock sensor followed by removing the sensor itself. The new knock sensor requires placement on the engine block followed by installation of the retaining bolt and 20 N.m (15 lb ft) torque application based on Fastener Notice in Service Precautions. Last, connect the electrical connector and lower the vehicle.

OEM 2005 Chevrolet SSR Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2005 Chevrolet SSR Knock Sensor
Part Number: 12623730
$13.47 MSRP: $25.30
You Save: $11.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12570125
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12623730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet SSR Submodels:
- Base | 8 Cyl 6.0 L GAS

2005 Chevrolet SSR Knock Sensor

With a comprehensive array of OEM 2005 Chevrolet SSR Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet SSR Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet SSR Parts Questions & Experts Answers

Q: How to replace the Knock Sensor (KS) on the left side on 2005 Chevrolet SSR?
A: First you must lift the vehicle before beginning KS left side replacement. Begin by removing the electrical connector from the knock sensor then unscrew the retaining bolt holding down the knock sensor followed by removing the sensor itself. The new knock sensor requires placement on the engine block followed by installation of the retaining bolt and 20 N.m (15 lb ft) torque application based on Fastener Notice in Service Precautions. Last, connect the electrical connector and lower the vehicle.

Related 2005 Chevrolet SSR Parts

Alternate Year Models

2004 Chevrolet SSR Knock Sensor 2006 Chevrolet SSR Knock Sensor