OEM 2005 Chevrolet SSR Body Control Module

2005 Chevrolet SSR Parts Questions & Experts Answers

• Q: How to replace the Body Control Module (BCM) on 2005 Chevrolet SSR?

  A: You need to first activate the convertible top function and place the Ignition Switch in off position before you work with the bcm connectors. Detach the negative battery terminal and slide off the rear upper garnish molding. You can reach bcm electrical connectors when you move the floor console toward the front then release its locking clips. Pull the two bracket retaining tabs that hold the bcm to the console bracket then one single tab before taking out the bcm and bracket combination from the console bracket. Untape the gray blue black brown and white connector plugs from bcm before taking out the vehicle part. To access the bcm you must unlock its retaining tabs then remove the bracket attached to it. When installing a new bcm set the mounting bracket onto the unit while pushing all retaining tabs fully into position join the five connectors from left to right beginning with brown and ending with gray to the bcm. Depress the bcm onto the console bracket alongside its designed bracket and secure it with all three holding points. Replace the floor console and rear upper trim. Plug in the negative battery terminal first and activate the bcm system when using a new bcm product if required. Finally, close the convertible top.