How to replace the front wheel bearing, hub, and seal on 2005 Chevrolet SSR?

To start the task raise and stabilize your vehicle after that remove the tire wheel and brake rotor in succession. First you must unfasten the ABS Sensor bolts and detach the ABS Sensor from the Wheel Hub and bearing. Detach the Steering Knuckle hub by unscrewing bolts then taking off the mounting bolts until it separates from the Steering Knuckle. Next, remove the splash shield from the Steering Knuckle. Placing the splash shield first on the Steering Knuckle requires proper fitting through the threaded holes. Place the Wheel Hub and bearing over the Steering Knuckle with its threaded holes correctly aligned and fasten it with mounting bolts while tightening them to 105 nm (77 ft. Lbs.). Secure the ABS Sensor to the Wheel Hub and bearing by running its mounting bolt to a stake of 18 nm (13 ft. Lbs). Place the brake rotor on the hub followed by the tire and wheel before lowering the vehicle down.

OEM 2005 Chevrolet SSR Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Bearings found

View related parts
2005 Chevrolet SSR Wheel Bearing, Rear
Part Number: 12479031
$49.62 MSRP: $96.32
You Save: $46.70 (49%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Axle Shaft; Wheel Bearing Kit; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Wheel
- Position: Rear
- Replaces: 09442126, 9442126
- Item Weight: 1.10 Pounds
- Item Dimensions: 3.4 x 3.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12479031
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2005 Chevrolet SSR Hub & Bearing, Front
Part Number: 19259798
$240.21 MSRP: $466.20
You Save: $225.99 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Hub; Hub, Front Wheel
- Position: Front
- Replaces: 12413037, 15130858
- Item Weight: 9.80 Pounds
- Item Dimensions: 7.0 x 6.6 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19259798
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2005 Chevrolet SSR Wheel Bearing

With a comprehensive array of OEM 2005 Chevrolet SSR Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet SSR Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet SSR Parts Questions & Experts Answers

Q: How to replace the front wheel bearing, hub, and seal on 2005 Chevrolet SSR?
A: To start the task raise and stabilize your vehicle after that remove the tire wheel and brake rotor in succession. First you must unfasten the ABS Sensor bolts and detach the ABS Sensor from the Wheel Hub and bearing. Detach the Steering Knuckle hub by unscrewing bolts then taking off the mounting bolts until it separates from the Steering Knuckle. Next, remove the splash shield from the Steering Knuckle. Placing the splash shield first on the Steering Knuckle requires proper fitting through the threaded holes. Place the Wheel Hub and bearing over the Steering Knuckle with its threaded holes correctly aligned and fasten it with mounting bolts while tightening them to 105 nm (77 ft. Lbs.). Secure the ABS Sensor to the Wheel Hub and bearing by running its mounting bolt to a stake of 18 nm (13 ft. Lbs). Place the brake rotor on the hub followed by the tire and wheel before lowering the vehicle down.