How to replace the shock absorber on an All Wheel Drive on 2005 Chevrolet Uplander?

The first step to change a Shock Absorber on all wheel drive vehicles demands following vehicle lifting guidelines for vehicle elevation and support. A utility stand should compress the coil spring at a slight level to reduce Shock Absorber tension. Disconnection of the air tube connector becomes necessary only when automatic level control is present on your Shock Absorber. Begin by uninstalling the Shock Absorber upper bolt with its nut along with the Shock Absorber lower nut until the Shock Absorber can be extracted. Installation requires placing the new Shock Absorber properly and applying fastener notice in service precautions. Fasten the Shock Absorber upper bolt to 85 nm (63 ft. Lbs.) along with Shock Absorber nuts (2 and 3) after positioning. Connect the air tube connector to the Shock Absorber when automatic level control is present on the vehicle. After completing the steps, eliminate both the utility stand then perform vehicle lowering.

OEM 2005 Chevrolet Uplander Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Shock Absorbers found

View related parts
2005 Chevrolet Uplander Shock Absorber, Rear
Part Number: 19169325
$201.90 MSRP: $362.16
You Save: $160.26 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Rear Leveling Shock; Suspension Strut and Shock Assembly; Complete Strut Set.; Shock; Absorber, Shock Absorber Air Lift
- Position: Rear
- Replaces: 22064824, 22064712, 22064876, 22064818, 22064822, 22064847
- Item Weight: 10.40 Pounds
- Item Dimensions: 19.6 x 6.6 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19169325
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS
View related parts
2005 Chevrolet Uplander Shock Absorber, Rear
Part Number: 15926213
$180.75 MSRP: $181.36
You Save: $0.61 (1%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Leveling Shock; Shock; Absorber, Shock Absorber Air Lift
- Position: Rear
- Replaces: 15216493, 15829670
- Item Weight: 5.90 Pounds
- Item Dimensions: 21.3 x 3.7 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15926213
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Uplander Strut
Part Number: 88965456
$106.59 MSRP: $200.15
You Save: $93.56 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly, Front Suspension; Complete Suspension Strut and Shock Absorber Kit.; Strut, Front And Rear Suspension
- Position: Front
- Replaces: 88965457
- Item Weight: 7.10 Pounds
- Item Dimensions: 7.2 x 24.2 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88965456
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Uplander Shock Absorber, Rear
Part Number: 15219512
Product Specifications
- Other Name: Absorber Assembly-Rear Leveling Shock; Suspension Strut and Shock Kit; Complete Strut.; Shock; Absorber, Shock Absorber Air Lift
- Position: Rear
- Replaces: 10367358, 10315979
- Item Weight: 5.40 Pounds
- Item Dimensions: 19.5 x 5.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15219512
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Uplander Shock Absorber, Rear
Part Number: 15219511
Product Specifications
- Other Name: Absorber Assembly-Rear Leveling Shock; Suspension Strut and Shock Kit; Complete Strut.; Shock; Absorber, Shock Absorber Air Lift
- Position: Rear
- Item Weight: 5.10 Pounds
- Item Dimensions: 4.2 x 4.2 x 19.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15219511
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Uplander Shock Absorber
Part Number: 15943270
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 10413405, 10311197, 10288272, 10406050, 10310676, 10318617, 88963482, 10331459, 10401283, 10331458, 10406052, 10401282
- Item Weight: 4.10 Pounds
- Item Dimensions: 26.5 x 4.7 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15943270
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2005 Chevrolet Uplander Shock Absorber

With a comprehensive array of OEM 2005 Chevrolet Uplander Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Uplander Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Uplander Shock Absorber Parts Questions & Experts Answers

Q: How to replace the shock absorber on an All Wheel Drive on 2005 Chevrolet Uplander?
A: The first step to change a Shock Absorber on all wheel drive vehicles demands following vehicle lifting guidelines for vehicle elevation and support. A utility stand should compress the coil spring at a slight level to reduce Shock Absorber tension. Disconnection of the air tube connector becomes necessary only when automatic level control is present on your Shock Absorber. Begin by uninstalling the Shock Absorber upper bolt with its nut along with the Shock Absorber lower nut until the Shock Absorber can be extracted. Installation requires placing the new Shock Absorber properly and applying fastener notice in service precautions. Fasten the Shock Absorber upper bolt to 85 nm (63 ft. Lbs.) along with Shock Absorber nuts (2 and 3) after positioning. Connect the air tube connector to the Shock Absorber when automatic level control is present on the vehicle. After completing the steps, eliminate both the utility stand then perform vehicle lowering.