How to Replace an A/C Hose in a Compressor Hose Assembly on 2005 GMC Envoy?

Refrigerant recovery must be performed before starting the replacement of the compressor hose assembly. The halogen leak detector (J 39400-A) should be used to examine leaked fittings on installed components. Start the replacement by unfastening the compressor hose assembly nut and then disconnect the compressor hose from the compressor. You should begin by taking away the foam washers and then unscrew the compressor suction hose nut from the accumulator followed by disconnecting the hose from the accumulator. First remove the o-ring seal together with the bolt supporting the lift bracket as well as the engine stud nut. Begin by disconnecting the compressor discharge hose from the condenser and then removing the compressor hose connection nut which is situated in the driver wheel opening and finally attaching the o-ring seals. Close all fluid pathways using caps or plugs to protect them. The first step for installation is to install new o-ring seals before connecting the compressor discharge hose to the condenser with the hose nut fastened to 28 n.m (21 lb ft). Finally insert the compressor hose into the driver wheel opening connector and tighten the connection with a torque of 48 n.m (35 lb ft). Then attach the compressor suction hose to the engine stud and fasten it with a nut secured to 48 n.m (35 lb ft). The compressor suction hose should be attached to the engine lift bracket using a bolt that is tightened to 48 n.m (35 lb ft) while the compressor suction hose must be connected to the accumulator by tightening the nut to 48 n.m (35 lb ft). Use sealing washers to fasten the compressor hose assembly to the compressor center using the washers with retaining nut . Secure this assembly by torquing the nut to 33 n.m (24 lb ft). Conclude the a/c system service by evacuating then recharging the system.

OEM 2005 GMC Envoy A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 A/C Hoses found

View related parts
2005 GMC Envoy Evaporator Tube
Part Number: 15923988
$106.37 MSRP: $218.58
You Save: $112.21 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-A/C Evaporator; A/C Refrigerant Liquid Hose; A/C Hose; Tube, A/C Evaporator
- Replaces: 15883408, 15125284
- Item Weight: 1.40 Pounds
- Item Dimensions: 33.6 x 22.1 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15923988
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 GMC Envoy A/C Hoses
Part Number: 19432438
$244.02 MSRP: $444.47
You Save: $200.45 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; Hose & Tube Assembly; Hose, A/C Compressor Suction And Discharge
- Replaces: 10378754, 15883021, 15276426, 15165305
- Condition: New
- SKU: 19432438
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2005 GMC Envoy Submodels:
- Denali | 8 Cyl 5.3 L GAS
View related parts
2005 GMC Envoy A/C Hoses
Part Number: 25841573
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose; Compressor & Condenser Hose; Hose & Tube Assembly; Hose, A/C Compressor Suction And Discharge
- Replaces: 15884820, 15185275, 25815112
- Item Weight: 3.10 Pounds
- Item Dimensions: 36.4 x 6.6 x 32.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25841573
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Envoy Submodels:
- SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
2005 GMC Envoy Evaporator Tube
Part Number: 15139726
Product Specifications
- Other Name: A/C Refrigerant Liquid Hose; A/C Hose
- Replaces: 15148465
- Item Weight: 1.90 Pounds
- Item Dimensions: 43.2 x 21.0 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15139726
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Envoy Submodels:
- Denali | 8 Cyl 5.3 L GAS
View related parts
2005 GMC Envoy A/C Hoses
Part Number: 15185275
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Replaced by: 25841573
- Item Weight: 3.00 Pounds
- Item Dimensions: 26.7 x 14.1 x 29.0 inches
- Condition: New
- SKU: 15185275
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Envoy Submodels:
- SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
2005 GMC Envoy Outlet Pipe
Part Number: 15139207
Product Specifications
- Other Name: Tube Assembly-Auxiliary A/C Compressor (W/ Auxiliary Heater Outlet P; A/C Refrigerant Liquid Hose; A/C Hose; Tube, A/C Evaporator
- Item Weight: 42.20 Pounds
- Item Dimensions: 32.1 x 22.5 x 12.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15139207
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Envoy Submodels:
- Denali | 8 Cyl 5.3 L GAS
View related parts
2005 GMC Envoy A/C Hoses
Part Number: 15884821
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly; Hose, A/C Compressor Suction And Discharge
- Replaces: 15825061, 15185276
- Item Weight: 4.00 Pounds
- Item Dimensions: 23.6 x 23.0 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15884821
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Envoy Submodels:
- SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
2005 GMC Envoy A/C Hoses
Part Number: 15883022
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly; Hose, A/C Compressor Suction And Discharge
- Replaces: 10378753, 15175349
- Item Weight: 2.40 Pounds
- Item Dimensions: 41.9 x 21.8 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15883022
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Envoy Submodels:
- Denali | 8 Cyl 5.3 L GAS
View related parts
2005 GMC Envoy Drain Tube
Part Number: 88986239
Product Specifications
- Other Name: Tube, Air Conditioner Evaporator Core Housing; Tube, A/C Evaporator Core Housing; Tube, Heater Core
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.6 x 1.2 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88986239
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Envoy Submodels:
- Denali | 8 Cyl 5.3 L GAS

2005 GMC Envoy A/C Hose

With a comprehensive array of OEM 2005 GMC Envoy A/C Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 GMC Envoy A/C Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 GMC Envoy Parts Questions & Experts Answers

Q: How to Replace an A/C Hose in a Compressor Hose Assembly on 2005 GMC Envoy?
A: Refrigerant recovery must be performed before starting the replacement of the compressor hose assembly. The halogen leak detector (J 39400-A) should be used to examine leaked fittings on installed components. Start the replacement by unfastening the compressor hose assembly nut and then disconnect the compressor hose from the compressor. You should begin by taking away the foam washers and then unscrew the compressor suction hose nut from the accumulator followed by disconnecting the hose from the accumulator. First remove the o-ring seal together with the bolt supporting the lift bracket as well as the engine stud nut. Begin by disconnecting the compressor discharge hose from the condenser and then removing the compressor hose connection nut which is situated in the driver wheel opening and finally attaching the o-ring seals. Close all fluid pathways using caps or plugs to protect them. The first step for installation is to install new o-ring seals before connecting the compressor discharge hose to the condenser with the hose nut fastened to 28 n.m (21 lb ft). Finally insert the compressor hose into the driver wheel opening connector and tighten the connection with a torque of 48 n.m (35 lb ft). Then attach the compressor suction hose to the engine stud and fasten it with a nut secured to 48 n.m (35 lb ft). The compressor suction hose should be attached to the engine lift bracket using a bolt that is tightened to 48 n.m (35 lb ft) while the compressor suction hose must be connected to the accumulator by tightening the nut to 48 n.m (35 lb ft). Use sealing washers to fasten the compressor hose assembly to the compressor center using the washers with retaining nut . Secure this assembly by torquing the nut to 33 n.m (24 lb ft). Conclude the a/c system service by evacuating then recharging the system.

Related 2005 GMC Envoy Parts

Alternate Year Models

2004 GMC Envoy A/C Hose 2006 GMC Envoy A/C Hose