OEM 2006 Buick Rendezvous Ride Height Sensor

2006 Buick Rendezvous Parts Questions & Experts Answers

• Q: How to replace the Ride Height Sensor on 2006 Buick Rendezvous?

  A: The first step in replacing the Ride Height Sensor demands raising and supporting the vehicle. Unplug the ride height sensor electrical connector before you remove the sensor link from the ball stud of the lower control arm. You should remove the existing ride height sensor bracket bolts before taking out the height sensor bracket and sensor unit from your automobile. The sensor link requires detachment from its position on the height sensor arm. First attach the ride height sensor link to the height sensor arm then install the height sensor bracket along with the height sensor onto the vehicle. Fasten the ride height sensor bracket bolts at 85 Nm (63 ft. lbs.). Plugin the electrical connector after reconnecting the ride height sensor link to the lower control arm ball stud. End the process by dropping the vehicle while performing diagnostic tests on the system.