Make sure this part fits

GM 89047637
Level Sensor

2002-2007 GM

Customer Questions & Expert Answers (8)
GM 89047637 Level Sensor
GM 89047637 Level Sensor
  • Part Description
    Sensor Assembly, Auto Level Control; Ride Height Sensor
  • Replaces
    88955433
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2002-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2002-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2003-2005 Pontiac AztekBase, Rally6 Cyl 3.4 L GAS
    2002-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89047637 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89047637 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Ride Height Sensor on Buick Rendezvous? Posted by Customer
    A:
    A diagnostic system check should always be conducted before starting the Ride Height Sensor replacement. The first step requires vehicle elevation while it receives support. Unplug the ride height sensor electrical connector from its location then extract the sensor link from the ball stud of the lower control arm. Remove the ride height sensor bracket bolts from their respective positions so you can take out both sensor and bracket from the vehicle. Disconnect the sensor link from the ball stud on the height sensor arm. To install the ride height sensor link users must connect it first to the height sensor arm before reattaching the sensor with its bracket to the vehicle. Attach the ride height sensor bracket by tightening the bolts to 85 Nm (63 ft. lbs.). Connect the ride height sensor link to the ball stud on the lower control arm and connect the electrical connector afterward. To finalize the process you must decrease the vehicle height before conducting a diagnostic system evaluation.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after completing the installation for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Lower the vehicle and perform a diagnostic system check.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What should be done after removing the sensor and bracket for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Detach the sensor link from the height sensor arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What should be detached from the height sensor arm for the 2006 Buick Rendezvous? Posted by Customer
    A:
    The sensor link.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What should you do after raising and supporting for the 2006 Buick Terraza? Posted by Customer
    A:
    Disconnect the automatic level control sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What should be removed after disconnecting the electrical connector for the 2005 Chevrolet Venture? Posted by Customer
    A:
    The height sensor link from the ball stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What should be done after installing the height sensor bracket bolts for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Attach the automatic level control sensor link onto the sensor arm ball stud, reconnect the automatic level control height sensor electrical connector, lower the vehicle, and reinstall the ELC/TRAILER fuse.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Level Sensor 89047637 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89047637 Level Sensor is available in the market under the name GM Ride Height Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89047637 Level Sensor fits certain Chevrolet Uplander, Venture models, as well as Buick Rendezvous, Terraza. Additionally, it is compatible with Pontiac Aztek, Montana and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 89047637 maintains top performance when functioning as the Sensor Assembly, Auto Level Control; Ride Height Sensor unit. The component 89047637 is constructed from durable material and its dimensions span 8.7 x 5.1 x 5.0 inches while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rear Sensor; Sensor; Sensor, Air Suspension Leveling Or Level Control. The part 89047637 has available replacement options 88955433. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.