How to replace the battery sensor on 2006 Chevrolet Cobalt?

Start replacement of the battery current sensor by disconnecting the negative Battery Cable from its battery tray connection. Disconnect the battery current sensor from its tape attachment on the negative Battery Cable before removing it from the cable. Insert the ground end of the negative Battery Cable through the battery current sensor and position it properly at the right end on the wire. Stick the battery current sensor to the negative Battery Cable using electrical tape and place it back into its proper position.

OEM 2006 Chevrolet Cobalt Battery Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Battery Sensor found

View related parts
2006 Chevrolet Cobalt Battery Current Sensor, Green Line
Part Number: 13505369
$19.14 MSRP: $35.94
You Save: $16.80 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Battery; Voltage Sensor; Negative Cable Cover; Sensor
- Replaces: 13502261
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 2.8 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13505369
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2006 Chevrolet Cobalt Battery Sensor

With a comprehensive array of OEM 2006 Chevrolet Cobalt Battery Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Cobalt Battery Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Cobalt Parts Questions & Experts Answers

Q: How to replace the battery sensor on 2006 Chevrolet Cobalt?
A: Start replacement of the battery current sensor by disconnecting the negative Battery Cable from its battery tray connection. Disconnect the battery current sensor from its tape attachment on the negative Battery Cable before removing it from the cable. Insert the ground end of the negative Battery Cable through the battery current sensor and position it properly at the right end on the wire. Stick the battery current sensor to the negative Battery Cable using electrical tape and place it back into its proper position.