OEM 2006 Chevrolet Cobalt Starter

2006 Chevrolet Cobalt Starter Parts Questions & Experts Answers

• Q: How to replace the starter motor for RPOs L61/LE5 on 2006 Chevrolet Cobalt?

  A: Replacing Starter motors on rpos l61/le5 requires users to begin by disconnecting the negative Battery Cable then supporting the vehicle from under. Sequencing removal starts with first unfastening the Starter solenoid terminal nut then the positive Battery Cable terminal after which the Starter solenoid wire terminal and the Starter solenoid "s" terminal nut before engine harness terminal and Starter bolts so you can extract the Starter. Place the Starter motor into position against the engine before screwing in all Starter bolts until they achieve 40 nm (30 ft. Lbs.) torque. After reconnecting the engine harness terminal to the Starter, carefully tighten the Starter solenoid "s" terminal nut to 3 nm (27 inch lbs.), then install the Starter solenoid wire terminal followed by the positive Battery Cable terminal while verifying the anti-rotational tab sits correctly in its indexing slot. Lower the vehicle afterward while installing the Starter solenoid terminal nut to 17 nm (13 ft. Lbs.) torques. Finish by reconnecting the negative Battery Cable.