OEM 2006 Chevrolet Cobalt Shift Cable

2006 Chevrolet Cobalt Shift Cable Parts Questions & Experts Answers

• Q: How to Replace a Shift Cable in a Manual Transaxle for MU3 on 2006 Chevrolet Cobalt?

  A: Begin by applying the parking brake followed by putting the transmission in 4th gear for the change of shift control cable. The console removal step reveals both cable retainers which need to be lifted up. After detachment of shift control assembly ends from their locations, move towards disconnecting the cable ends from transmission shift levers while recording their locations. The Shift Cable should be separated from the transmission cable bracket followed by vehicle lift and support. The Shift Cable attachment nut from the underbody needs removal while lowering the vehicle. To proceed start by taking out the left panel of the instrument area followed by moving the front carpet on the driver's side. Tenon the grommet away from the Floor Pan while drawing the cable through the driver's floor opening for removal. To install place the cable assembly through the driver's floor opening before fixing the grommet square with the opening. Drivers should install first their side front carpet before placing the left instrument panel closeout panel back and raising the automobile. Fasten the Shift Cable attachment nut under the body while tightening it to 10 nm (89 inch lbs.) before lowering the vehicle. The shift cables should be installed on the transmission cable bracket before connecting each cable end to the transmission shift lever while following the disassembly documentation. Additionally, the Shift Cable must be connected to the shift control assembly according to the disassembly procedure. The shifter ring needs upward manipulation during tab unlocking operations to achieve total release while preventing dangerous strain on plastic parts. The shifter ring pull-up followed by locking plier installation allows the operator to compress the 4th gear locking tab for release. First press down the cable retainers while ensuring 4th gear is selected on the transmission then pull the shift control assembly driving side lock clip back to its original position before reinserting the console.