How to replace the vacuum brake booster on 2006 Chevrolet Colorado?

Start by detaching the master cylinder assembly and knee bolster trim panel. Start by pushing out the retaining clip of the Pushrod then pulling the clevis pin and finally sliding the Pushrod off the Brake Pedal. Take the Brake Booster out of the car after removing all its mounting nuts. Put the Brake Booster in its proper position at the bulkhead and use the mounting nuts to fasten it before tightening to 20 nm (15 ft. Lbs.). Secure the Pushrod back to the Brake Pedal by inserting the clevis pin and retainer clip at its end. First adjust the stop lamp switch and cruise control release switch then put back the master cylinder assembly and knee bolster trim panel.

OEM 2006 Chevrolet Colorado Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Booster found

View related parts
2006 Chevrolet Colorado Brake Booster Part Number: 89040285
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Booster Assembly
- Item Weight: 11.80 Pounds
- Item Dimensions: 11.9 x 16.0 x 11.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89040285
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2006 Chevrolet Colorado Brake Booster

With a comprehensive array of OEM 2006 Chevrolet Colorado Brake Booster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Colorado Brake Booster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Colorado Brake Booster Parts and Q&A

Q: How to replace the vacuum brake booster on 2006 Chevrolet Colorado?
A: Start by detaching the master cylinder assembly and knee bolster trim panel. Start by pushing out the retaining clip of the Pushrod then pulling the clevis pin and finally sliding the Pushrod off the Brake Pedal. Take the Brake Booster out of the car after removing all its mounting nuts. Put the Brake Booster in its proper position at the bulkhead and use the mounting nuts to fasten it before tightening to 20 nm (15 ft. Lbs.). Secure the Pushrod back to the Brake Pedal by inserting the clevis pin and retainer clip at its end. First adjust the stop lamp switch and cruise control release switch then put back the master cylinder assembly and knee bolster trim panel.