How to replace the front drive shaft on 2006 Chevrolet Colorado?

Raising and properly supporting the vehicle is the first step to replace the front propeller shaft. Note down the position of the front u-joint relative to the front Differential pinion yoke and the rear u-joint position relative to the transfer case drive flange. Unfasten drive flange retaining nuts and bolts while removing clamps and bolts from front drive axle pinion flange to pull out the front propeller shaft from the vehicle. Tape or a rubber band should be used to cover front u-joint bearing caps for protection against separation. To install the front propeller shaft you need to eliminate tape or rubber band from the front u-joint and correctly align the reference marks of the front u-joint during installation. Use only your fingers to tighten retaining bolts at the front propeller shaft position before adding front u-joint bolts and clamps using rear u-joint reference mark alignment. Fasten the pinion flange to propeller shaft bolts at 20 nm (15 ft. Lbs.) together with the front u-joint clamp bolts. All bolts must receive this torque value. Finally, lower the vehicle.

OEM 2006 Chevrolet Colorado Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Drive Shafts found

View related parts
2006 Chevrolet Colorado Drive Shaft, Front
Part Number: 25843685
$595.79 MSRP: $945.95
You Save: $350.16 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Axle Propeller; Driveshaft; Shaft, Propeller
- Position: Front
- Replaces: 15104642
- Item Weight: 15.30 Pounds
- Item Dimensions: 35.0 x 7.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25843685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Colorado Drive Shaft
Part Number: 25787948
Product Specifications
- Other Name: Shaft Assembly-Front & Rear Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Position: Front and Rear
- Replaces: 15236807
- Item Weight: 55.90 Pounds
- Item Dimensions: 92.9 x 6.8 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25787948
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Colorado Drive Shaft
Part Number: 22811801
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 25787945
- Item Weight: 14.50 Pounds
- Item Dimensions: 79.4 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22811801
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Colorado Drive Shaft
Part Number: 25787947
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15116624
- Item Weight: 15.60 Pounds
- Item Dimensions: 65.3 x 4.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25787947
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2006 Chevrolet Colorado Drive Shaft
Part Number: 15286715
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Item Weight: 18.80 Pounds
- Item Dimensions: 61.0 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15286715
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Colorado Drive Shaft
Part Number: 25787946
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Item Weight: 17.90 Pounds
- Item Dimensions: 50.5 x 4.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25787946
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2006 Chevrolet Colorado Axle Assembly, Front
Part Number: 10399597
Product Specifications
- Other Name: Axle Assembly-Front (3.73 Ratio); Axle Shaft
- Position: Front
- Condition: New
- SKU: 10399597
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
View related parts
2006 Chevrolet Colorado Axle Assembly
Part Number: 25814905
Product Specifications
- Other Name: Axle; Axle Shaft
- Condition: New
- SKU: 25814905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2006 Chevrolet Colorado Drive Shaft

With a comprehensive array of OEM 2006 Chevrolet Colorado Drive Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Colorado Drive Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Colorado Parts Questions & Experts Answers

Q: How to replace the front drive shaft on 2006 Chevrolet Colorado?
A: Raising and properly supporting the vehicle is the first step to replace the front propeller shaft. Note down the position of the front u-joint relative to the front Differential pinion yoke and the rear u-joint position relative to the transfer case drive flange. Unfasten drive flange retaining nuts and bolts while removing clamps and bolts from front drive axle pinion flange to pull out the front propeller shaft from the vehicle. Tape or a rubber band should be used to cover front u-joint bearing caps for protection against separation. To install the front propeller shaft you need to eliminate tape or rubber band from the front u-joint and correctly align the reference marks of the front u-joint during installation. Use only your fingers to tighten retaining bolts at the front propeller shaft position before adding front u-joint bolts and clamps using rear u-joint reference mark alignment. Fasten the pinion flange to propeller shaft bolts at 20 nm (15 ft. Lbs.) together with the front u-joint clamp bolts. All bolts must receive this torque value. Finally, lower the vehicle.

Related 2006 Chevrolet Colorado Parts

Alternate Year Models

2005 Chevrolet Colorado Drive Shaft 2007 Chevrolet Colorado Drive Shaft