How to replace the front drive shaft on 2007 Chevrolet Colorado?

The first step for front propeller shaft replacement involves lifting up and supporting the vehicle. Record the alignment between the front u-joint and pinion yoke of the front Differential and the rear u-joint attachment to the transfer case drive flange. Begin the process of removing the front propeller shaft from the vehicle by first removing the drive flange retaining bolts and nuts and then followed by removing clamps and bolts on the front drive axle pinion flange. Tape and rubber bands should be used to secure the front u-joint bearing caps to stop bearing cap separation. Installation requires tape or rubber band removal before you can install the front propeller shaft which must have its front u-joint reference marks properly aligned. Start by tightening the retaining bolts just to fingertip strength for positioning the front propeller shaft before putting on front u-joint bolts and clamps while matching their reference points on the rear u-joint. Position the propeller shaft to pinion flange bolts while simultaneously tightening them to 20 n.m (15 lb ft), and the front propeller u-joint clamp bolts must reach the same torque level. Finally, lower the vehicle.

OEM 2007 Chevrolet Colorado Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Drive Shafts found

View related parts
2007 Chevrolet Colorado Drive Shaft, Front
Part Number: 25843685
$595.79 MSRP: $945.95
You Save: $350.16 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Axle Propeller; Driveshaft; Shaft, Propeller
- Position: Front
- Replaces: 15104642
- Item Weight: 15.30 Pounds
- Item Dimensions: 35.0 x 7.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25843685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Drive Shaft
Part Number: 25787948
Product Specifications
- Other Name: Shaft Assembly-Front & Rear Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Position: Front and Rear
- Replaces: 15236807
- Item Weight: 55.90 Pounds
- Item Dimensions: 92.9 x 6.8 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25787948
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Drive Shaft
Part Number: 22811801
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 25787945
- Item Weight: 14.50 Pounds
- Item Dimensions: 79.4 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22811801
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Drive Shaft
Part Number: 25787947
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15116624
- Item Weight: 15.60 Pounds
- Item Dimensions: 65.3 x 4.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25787947
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2007 Chevrolet Colorado Drive Shaft
Part Number: 15286715
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Item Weight: 18.80 Pounds
- Item Dimensions: 61.0 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15286715
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Drive Shaft
Part Number: 25787946
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Item Weight: 17.90 Pounds
- Item Dimensions: 50.5 x 4.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25787946
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2007 Chevrolet Colorado Axle Assembly
Part Number: 25814905
Product Specifications
- Other Name: Axle; Axle Shaft
- Condition: New
- SKU: 25814905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2007 Chevrolet Colorado Drive Shaft

With a comprehensive array of OEM 2007 Chevrolet Colorado Drive Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Colorado Drive Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Colorado Parts Questions & Experts Answers

Q: How to replace the front drive shaft on 2007 Chevrolet Colorado?
A: The first step for front propeller shaft replacement involves lifting up and supporting the vehicle. Record the alignment between the front u-joint and pinion yoke of the front Differential and the rear u-joint attachment to the transfer case drive flange. Begin the process of removing the front propeller shaft from the vehicle by first removing the drive flange retaining bolts and nuts and then followed by removing clamps and bolts on the front drive axle pinion flange. Tape and rubber bands should be used to secure the front u-joint bearing caps to stop bearing cap separation. Installation requires tape or rubber band removal before you can install the front propeller shaft which must have its front u-joint reference marks properly aligned. Start by tightening the retaining bolts just to fingertip strength for positioning the front propeller shaft before putting on front u-joint bolts and clamps while matching their reference points on the rear u-joint. Position the propeller shaft to pinion flange bolts while simultaneously tightening them to 20 n.m (15 lb ft), and the front propeller u-joint clamp bolts must reach the same torque level. Finally, lower the vehicle.