How to remove and replace the power mirror switch on 2006 Chevrolet Colorado?

Replacing the power mirror switch will require removal of the screws holding the switch plate assembly in place to the door trim panel. Unscrew the electrical connections and remove the assembly. In case of replacement of switches only, take them out of the plate. Install the switches and hook the electrical connectors and lock the assembly.

OEM 2006 Chevrolet Colorado Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2006 Chevrolet Colorado Mirror Switch, Rear Driver Side Part Number: 15205243
$53.55 MSRP: $79.68
You Save: $26.13 (33%)
Product Specifications
- Other Name: Switch, Rear View Mirror-Inside & Outside; Power Mirror Switch; Switch, Rear View Mirror - Inside & Outside
- Position: Rear Driver Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.1 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15205243
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2006 Chevrolet Colorado Mirror Switch

With a comprehensive array of OEM 2006 Chevrolet Colorado Mirror Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Colorado Mirror Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Colorado Mirror Switch Parts and Q&A

Q: How to remove and replace the power mirror switch on 2006 Chevrolet Colorado?
A: Replacing the power mirror switch will require removal of the screws holding the switch plate assembly in place to the door trim panel. Unscrew the electrical connections and remove the assembly. In case of replacement of switches only, take them out of the plate. Install the switches and hook the electrical connectors and lock the assembly.