OEM 2006 Chevrolet Corvette Oil Filter

2006 Chevrolet Corvette Oil Filter Parts Questions & Experts Answers

• Q: How to replace the engine oil and oil filter on 2006 Chevrolet Corvette?

  A: Open the hood then take out the oil fill cap to start the engine oil and Oil Filter replacement process. After raising the vehicle users should remove both oil pan drain plugs while draining engine oil through suitable containers. Engine Oil Filter replacement starts with extracting the filter from its position within the engine block while checking for removal of the old gasket before application of the new Oil Filter. Secure the new engine Oil Filter to 30 nm (22 ft. Lbs.) so you can put in the oil pan Drain Plug with a torque of 25 nm (18 ft. Lbs.). Owners must lower their vehicle while filling seven quarts of oil into the dry sump tank but should never use additives designed for engine oil in corvette engines. Start the engine once both the Dipstick and the Oil Filler Cap are installed and let it run for at least 15 seconds to help oil circulation and air displacement before shutting off the engine. Start by removing the oil fill cap from the dry sump tank before pouring 1 quart of oil inside it. Check the oil level with the cap off and then replace the cap while closing the hood. Finally, reset the engine oil life monitor.