How to replace the front exhaust heat shield on 2006 Chevrolet Equinox?

Raising the vehicle stands as the first step to replace the front Exhaust Heat Shield. Next, remove the Catalytic Converter. Treatment of the front and rear heat shields involves shared rip attachment points thus you must first disassemble the nut and rivets from the heat shield before detachment. Start by putting the shield on the vehicle while matching up the front hole stud and next set the rear shield beneath the rear shield before resting it against the underbody. First install the nut with 10 nm (89 ft. Lbs.) torque and then apply the rivets after reinstalling the Catalytic Converter.

OEM 2006 Chevrolet Equinox Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Exhaust Heat Shields found

View related parts
2006 Chevrolet Equinox Heat Shield, Lower Passenger Side
Part Number: 12575495
Product Specifications
- Other Name: Shield-Exhaust Manifold Lower Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Lower Passenger Side
- Item Weight: 1.10 Pounds
- Item Dimensions: 22.4 x 6.0 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12575495
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS
View related parts
2006 Chevrolet Equinox Heat Shield, Passenger Side
Part Number: 12575494
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 17.2 x 5.8 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12575494
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS
View related parts
2006 Chevrolet Equinox Heat Shield, Driver Side
Part Number: 12575493
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Item Weight: 2.60 Pounds
- Item Dimensions: 22.4 x 6.0 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12575493
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS
View related parts
2006 Chevrolet Equinox Heat Shield
Part Number: 25912945
Product Specifications
- Other Name: Shield Assembly-Exhaust Heat (At Dash Panel); Exhaust Heat Shield; Shield, Exhaust Pipe
- Replaces: 22722801
- Item Weight: 0.90 Pounds
- Item Dimensions: 43.4 x 9.4 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25912945
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS

2006 Chevrolet Equinox Exhaust Heat Shield

With a comprehensive array of OEM 2006 Chevrolet Equinox Exhaust Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Equinox Exhaust Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Equinox Exhaust Heat Shield Parts Questions & Experts Answers

Q: How to replace the front exhaust heat shield on 2006 Chevrolet Equinox?
A: Raising the vehicle stands as the first step to replace the front Exhaust Heat Shield. Next, remove the Catalytic Converter. Treatment of the front and rear heat shields involves shared rip attachment points thus you must first disassemble the nut and rivets from the heat shield before detachment. Start by putting the shield on the vehicle while matching up the front hole stud and next set the rear shield beneath the rear shield before resting it against the underbody. First install the nut with 10 nm (89 ft. Lbs.) torque and then apply the rivets after reinstalling the Catalytic Converter.