How to replace the steering knuckle in the rear suspension on 2006 Chevrolet Impala?

Start the process by properly supporting a raised vehicle before you can remove both tire and wheel assembly. Scribe a mark on the strut for the knuckle then detach the bearing/hub assembly. Begin by separating the knuckle's rear wheel spindle rods then remove the Trailing Arm from the knuckle assembly. Move the vehicle's rear strut to knuckle bolts and nuts before extracting the knuckle from the vehicle. Begin by returning the knuckle to its original position on the vehicle before starting the hand installation of bolts and nuts to the strut-knuckle connection. Tightening procedures must be postponed until later. Connect your Trailing Arm components to the knuckle assembly after which you should attach the spindle rods on the knuckle. With all bolts and nuts installed attach the bearing/hub assembly to the strut and tighten every connection to 120 nm (89 ft. Lbs.) after following the fastener notice in service precautions. Place the tire and wheel assembly back and lower the vehicle before examining and possible adjustment of the rear wheel alignment.

OEM 2006 Chevrolet Impala Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Steering Knuckles found

View related parts
2006 Chevrolet Impala Knuckle, Driver Side
Part Number: 23130696
$388.19 MSRP: $639.48
You Save: $251.29 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Driver Side
- Replaces: 19151396, 18022046, 25816705, 18060616
- Item Weight: 4.50 Pounds
- Item Dimensions: 13.4 x 11.1 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23130696
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Knuckle, Driver Side
Part Number: 23127629
$268.88 MSRP: $442.93
You Save: $174.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining); Knuckle, Steering
- Position: Driver Side
- Replaces: 18060638, 18060652, 88955418, 10434254, 18060680, 20899802, 25816684, 22990752
- Item Weight: 5.10 Pounds
- Item Dimensions: 5.9 x 12.9 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23127629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Knuckle, Passenger Side
Part Number: 22990753
$265.66 MSRP: $421.79
You Save: $156.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining)
- Position: Passenger Side
- Replaced by: 23127630
- Item Weight: 5.20 Pounds
- Item Dimensions: 5.4 x 13.1 x 12.6 inches
- Condition: New
- SKU: 22990753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Knuckle, Passenger Side
Part Number: 23130695
$433.92 MSRP: $623.98
You Save: $190.06 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Passenger Side
- Replaces: 19151397, 18022047, 18060617, 25816704
- Item Weight: 4.10 Pounds
- Item Dimensions: 14.0 x 10.6 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23130695
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Knuckle, Passenger Side
Part Number: 23127630
$265.66 MSRP: $421.79
You Save: $156.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 18060639, 22990753, 25816683, 10434255, 18021361, 18060681, 20899801, 88955419, 18060653
- Item Weight: 5.40 Pounds
- Item Dimensions: 5.5 x 13.4 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23127630
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Knuckle, Driver Side
Part Number: 25816686
$19.97 MSRP: $32.89
You Save: $12.92 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 18023734, 18061054
- Item Weight: 10.90 Pounds
- Item Dimensions: 11.4 x 9.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25816686
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- Base, LS, LS Sport, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Impala Knuckle, Passenger Side
Part Number: 25816685
$146.70 MSRP: $240.12
You Save: $93.42 (39%)
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 18023735, 18061055
- Item Weight: 10.50 Pounds
- Item Dimensions: 14.8 x 10.3 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25816685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- Base, LS, LS Sport, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2006 Chevrolet Impala Steering Knuckle

With a comprehensive array of OEM 2006 Chevrolet Impala Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Impala Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Impala Parts Questions & Experts Answers

Q: How to replace the steering knuckle in the rear suspension on 2006 Chevrolet Impala?
A: Start the process by properly supporting a raised vehicle before you can remove both tire and wheel assembly. Scribe a mark on the strut for the knuckle then detach the bearing/hub assembly. Begin by separating the knuckle's rear wheel spindle rods then remove the Trailing Arm from the knuckle assembly. Move the vehicle's rear strut to knuckle bolts and nuts before extracting the knuckle from the vehicle. Begin by returning the knuckle to its original position on the vehicle before starting the hand installation of bolts and nuts to the strut-knuckle connection. Tightening procedures must be postponed until later. Connect your Trailing Arm components to the knuckle assembly after which you should attach the spindle rods on the knuckle. With all bolts and nuts installed attach the bearing/hub assembly to the strut and tighten every connection to 120 nm (89 ft. Lbs.) after following the fastener notice in service precautions. Place the tire and wheel assembly back and lower the vehicle before examining and possible adjustment of the rear wheel alignment.