Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Chevrolet Impala Tie Rod End

Steering Rod End
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tie Rod Ends found

  • 2006 Chevy Impala Tie Rod End - 26086579
    2006 Chevy Impala Tie Rod End - 26086579
    2006 Chevy Impala Tie Rod End Diagram - 26086579
    View related parts

    2006 Chevrolet Impala Outer Tie Rod Part Number: 26086579

    $69.71 MSRP: $139.96
    You Save: $70.25 (51%)
    ADD TO CART
    Product Specifications
    • Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
    • Position: Outer
    • Replaces: 26045836, 89047698
    • Item Weight: 1.60 Pounds
    • Item Dimensions: 6.6 x 5.4 x 3.8 inches
    • Condition: New
    • SKU: 26086579
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2006 Chevrolet Impala Submodels:
    • 50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
  • 2006 Chevy Impala Tie Rod End - 26086580
    2006 Chevy Impala Tie Rod End - 26086580
    2006 Chevy Impala Tie Rod End Diagram - 26086580
    View related parts

    2006 Chevrolet Impala Outer Tie Rod Part Number: 26086580

    Product Specifications
    • Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
    • Position: Outer
    • Item Weight: 1.50 Pounds
    • Item Dimensions: 6.9 x 5.6 x 3.7 inches
    • Condition: New
    • SKU: 26086580
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2006 Chevrolet Impala Submodels:
    • 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2006 Chevrolet Impala Tie Rod End

With a comprehensive array of OEM 2006 Chevrolet Impala Tie Rod End, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Impala Tie Rod End are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Impala Tie Rod End Parts and Q&A

  • Q: How to replace the Rack and Pinion Outer Tie Rod End on 2006 Chevrolet Impala?
    A: Before performing replacement of the Rack And Pinion outer Tie Rod End it is essential to lift and secure the vehicle. Start by removing the tire assembly and subsequent detachment of the prevailing torque nut from the outer tie rod assembly followed by unfastening the jam nut from the inner tie rod assembly. Steering linkage joint should not experience damage when you avoid using a wedge to disconnect its parts. A universal steering linkage puller (J 24319-B) should be used for outer tie rod assembly removal from the Steering Knuckle. Proceed with removing the outer tie rod assembly from its connection to the inner tie rod assembly . When installing the components keep the outer and inner tie rod assemblies together using the jam nut but do not over-tighten it. The prevailing torque nut needs to be installed on the outer tie rod assembly before it is secured to the Steering Knuckle through tightening to 30 nm (22 ft. Lbs.) while rotating by 120 degrees until 2 1/2 to 4 1/2 threads extend beyond the nylon washer. The installation ends with a tire and wheel assembly reinstallation followed by vehicle lowering and a front end alignment procedure.

Related 2006 Chevrolet Impala Parts

Alternate Year Models

+
2005 Chevrolet Impala Tie Rod End 2007 Chevrolet Impala Tie Rod End