How to replace the outer tie rod end on Chevrolet Impala?

Primary steps to change the outer Tie Rod End start by raising the vehicle and removing both tire and wheel components. The prevailing torque nut on the outer tie rod assembly should be eliminated before the jam nut on the inner tie rod assembly gets loose. Inserting a wedge between the joint and attached part because driving the wedge causes dangerous seal damage to the steering linkage. The universal steering linkage puller (J 24319-B) enables removal of the outer tie rod assembly from the Steering Knuckle so you can detach the outer tie rod assembly from the inner tie rod assembly. The outer tie rod assembly should be joined to the inner tie rod assembly before tightening the jam nut. The Steering Knuckle must have the outer tie rod assembly placed into it before tightening the prevailing torque nut to 30 nm (22 ft. Lbs.) with an additional 120-degree rotation until 2 1/2 - 4 1/2 threads can be seen after the nylon washer. When installing the tire and wheel assembly after tightening the jam nut to 70 nm (52 ft. Lbs.) against the outer tie rod assembly the vehicle needs to be lowered then a front end alignment must be performed.

OEM Chevrolet Impala Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Tie Rod Ends found

View related parts
Chevrolet Impala Outer Tie Rod
Part Number: 26086579
$69.71 MSRP: $139.96
You Save: $70.25 (51%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Replaces: 26045836, 89047698
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Tie Rod End, Outer
Part Number: 26056100
$39.83 MSRP: $65.18
You Save: $25.35 (39%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Outer Tie Rod; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 07826713, 7826713
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996, 1984-1985 Chevrolet Impala | Base, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Outer Tie Rod
Part Number: 84494628
$40.97 MSRP: $99.95
You Save: $58.98 (60%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 22776539
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Outer Tie Rod
Part Number: 19418696
$80.94 MSRP: $126.79
You Save: $45.85 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 26056811, 89047697
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2001 Chevrolet Impala | Base, LS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Outer Tie Rod
Part Number: 13286686
$64.67 MSRP: $110.12
You Save: $45.45 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Outer Tie Rod
Part Number: 26086580
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

Chevrolet Impala Tie Rod End

Our website offers an extensive catalog of genuine Chevrolet Impala Tie Rod End at unbeatable prices. Every OEM Chevrolet Impala Tie Rod End comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Impala Tie Rod End Parts Questions & Experts Answers

Outer Tie Rod
26086580
Q: How to replace the outer tie rod end on Chevrolet Impala?
A: Primary steps to change the outer Tie Rod End start by raising the vehicle and removing both tire and wheel components. The prevailing torque nut on the outer tie rod assembly should be eliminated before the jam nut on the inner tie rod assembly gets loose. Inserting a wedge between the joint and attached part because driving the wedge causes dangerous seal damage to the steering linkage. The universal steering linkage puller (J 24319-B) enables removal of the outer tie rod assembly from the Steering Knuckle so you can detach the outer tie rod assembly from the inner tie rod assembly. The outer tie rod assembly should be joined to the inner tie rod assembly before tightening the jam nut. The Steering Knuckle must have the outer tie rod assembly placed into it before tightening the prevailing torque nut to 30 nm (22 ft. Lbs.) with an additional 120-degree rotation until 2 1/2 - 4 1/2 threads can be seen after the nylon washer. When installing the tire and wheel assembly after tightening the jam nut to 70 nm (52 ft. Lbs.) against the outer tie rod assembly the vehicle needs to be lowered then a front end alignment must be performed.