How to Replace Coil Springs on 2006 Chevrolet Malibu?

Start by supporting the vehicle while it is raised. Remove the tire and wheel from the rear of the vehicle. To work with Coil Springs use an otc 204-167 compressor pair with otc 204-167-01 adapter shoes or a comparable spring compressor system. Place a suitable jack stand beneath the lower Control Arm to obtain support before removing the lower Control Arm to knuckle bolt, nut, and inboard fastener. The proper tools should be used for lower Control Arm support when working with high-pressure Coil Springs because premature separation could launch the spring as a dangerous projectile. First lower the lower Control Arm with its coil spring secured to it using a jack stand. Then detach the coil spring from the lower Control Arm. Check the coil spring insulators for signs of damage before deciding to replace them. When installing the spring position it on the lower Control Arm before using a jack stand to raise the lower Control Arm into position. Fasten the lower Control Arm to its knuckle bolt along with a nut and inboard fastener while tapering the bolt and nut to 60 nm (44 ft. Lbs.) torque with an extra 60-degree twist. Follow these instructions: remove the otc 204-167 compressor or equivalent then remove the jack stand to install the tire and wheel before lowering the vehicle.

OEM 2006 Chevrolet Malibu Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Coil Springs found

View related parts
2006 Chevrolet Malibu Coil Spring, Rear
Part Number: 22714392
$40.63 MSRP: $72.56
You Save: $31.93 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear Spring; Coil Spring Set; Coil Springs; Spring
- Position: Rear
- Item Weight: 4.70 Pounds
- Item Dimensions: 15.8 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22714392
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, LS, LT, LTZ, Maxx LS, Maxx LT, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Malibu Coil Spring, Rear
Part Number: 22675760
Product Specifications
- Other Name: Spring, Rear Spring; Coil Spring Set; Coil Springs; Spring
- Position: Rear
- Item Weight: 5.80 Pounds
- Item Dimensions: 14.9 x 6.1 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22675760
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Malibu Coil Spring, Front
Part Number: 15257490
Product Specifications
- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Replaces: 15237283, 15832953
- Item Weight: 7.00 Pounds
- Item Dimensions: 7.3 x 6.6 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15257490
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- LS, LT, LTZ, Maxx SS, SS | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Malibu Coil Spring, Front
Part Number: 22716374
Product Specifications
- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Item Weight: 6.20 Pounds
- Item Dimensions: 14.4 x 6.8 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22716374
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS

2006 Chevrolet Malibu Coil Springs

With a comprehensive array of OEM 2006 Chevrolet Malibu Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Malibu Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to Replace Coil Springs on 2006 Chevrolet Malibu?
A: Start by supporting the vehicle while it is raised. Remove the tire and wheel from the rear of the vehicle. To work with Coil Springs use an otc 204-167 compressor pair with otc 204-167-01 adapter shoes or a comparable spring compressor system. Place a suitable jack stand beneath the lower Control Arm to obtain support before removing the lower Control Arm to knuckle bolt, nut, and inboard fastener. The proper tools should be used for lower Control Arm support when working with high-pressure Coil Springs because premature separation could launch the spring as a dangerous projectile. First lower the lower Control Arm with its coil spring secured to it using a jack stand. Then detach the coil spring from the lower Control Arm. Check the coil spring insulators for signs of damage before deciding to replace them. When installing the spring position it on the lower Control Arm before using a jack stand to raise the lower Control Arm into position. Fasten the lower Control Arm to its knuckle bolt along with a nut and inboard fastener while tapering the bolt and nut to 60 nm (44 ft. Lbs.) torque with an extra 60-degree twist. Follow these instructions: remove the otc 204-167 compressor or equivalent then remove the jack stand to install the tire and wheel before lowering the vehicle.