How to replace the headlight assembly or headlight bulb or cornering, sidemarker, park, and turn signal bulb on 2006 Chevrolet Malibu?

Question

Accepted Answer

While holding the headlamp to avoid breaking, take out the bolts from the headlamp assembly to start the bulb and signal bulb replacement process. Open the hood then lift the headlamp assembly to pop its retaining tabs from the fender bottom and edge. Disconnect the headlamp power connector afterwards. Take the headlamp assembly off the vehicle by rotating it counterclockwise if required. Turn the headlamp socket by twisting it in the opposite direction to separate it from the housing before disconnecting the electrical connector on the bulb side. To access the park/turn bulb you need to turn the access cover counterclockwise and take out the socket holder by spinning it counterclockwise before withdrawing the bulb. Fasten the park/turn bulb directly into the bulb socket and screw the socket into the headlamp housing by turning it right. Twist the park/turn bulb access cover clockwise to remove it before connecting the headlamp bulb to the electrical connector. Use this bulb to lock into the housing by turning the socket clockwise. Secure the internal headlamp bulb access cover then reposition the electrical connector into the assembly base before easing it back onto its vehicle seatings. Finally mount the bolts into the headlamp base and tighten them to 2 N.m (18 lb in). After placing the hood down check the headlamp alignment and fix it if needed.

OEM 2006 Chevrolet Malibu Headlight Bulb

2 Headlight Bulbs found

2006 Chevrolet Malibu Headlamp Bulb, Green Line

2006 Chevrolet Malibu Headlamp Bulb

2006 Chevrolet Malibu Headlight Bulb

2006 Chevrolet Malibu Parts Questions & Experts Answers

Related 2006 Chevrolet Malibu Parts

Alternate Year Models