Other Name: Bulb, Capsule/Headlamp/Fog Lamp; Fog Light Bulbs; Headlight Bulbs; Car Bulbs; High Beam Bulb; Parking Lamp Bulb; Fog Lamp Bulb; Lower Beam Bulb; Bulb
Replaced by: 13503417
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2019-2024, 2004-2015 Chevrolet Malibu | Base, Classic LS, Classic LT, Eco, Hybrid, L, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, Premier, RS, SS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
Other Name: Bulb-Parking & Turn Signal Lamp; Turn Signal Bulbs; Car Bulbs; Tail Lamp Bulb; Side Marker; Signal; Parking; Exterior; Stoplamp; Turn Signal; Standard Parts.
Replaces: 13500817, 13579187, 13579189
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2013-2024 Chevrolet Malibu | Eco, Hybrid, L, LS, LT, LTZ, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2012, 1997-2003 Chevrolet Malibu | Base, Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Other Name: Bulb-Stop & Tail & Turn Signal Lamp; Daytime Running Light; Back Up Light; Parking Light; Turn Signal; Tail Light Bulbs.; Tail Lamp Bulb; Backup, Stop, Signal, and Run Lamp Bulbs; Standard Parts.
Replaces: 13502322
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2012 Chevrolet Malibu | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Other Name: Ballast, Capsule/Headlamp/Fog Lamp; Lighting Control Module; Hid Bulb Ballast; Bulb Ballast; Control Unit; Hid Headlamp Components; Ballast
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
Chevrolet Malibu Headlight Bulb
Our website offers an extensive catalog of genuine Chevrolet Malibu Headlight Bulb at unbeatable prices. Every OEM Chevrolet Malibu Headlight Bulb comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Malibu Headlight Bulb Parts Questions & Experts Answers
Q: How to replace the headlight assembly or headlight bulb or cornering, sidemarker, park, and turn signal bulb on Chevrolet Malibu?
A: While holding the headlamp to protect it open the hood before replacing any headlamp parts. Use a tool to take out all bolts from the headlamp assembly then push upward to free the attaching tabs on its bottom and fender edge. Unplug the power connector from the headlamp before you detach the unit from its vehicle mount. Turn the headlamp bulb access cover to the left if necessary. When ready, you can remove the socket by turning it counterclockwise. Unplug the headlamp bulb electrical wire when needed. To take out the park/turn bulb from the socket turn it counterclockwise and then turn the access cover counterclockwise. Remove the bulb when necessary by gently pulling it from its socket. To install the park/turn bulb you need to place it into the bulb socket and turn the socket clock-wise to position it inside the headlamp housing. Secure the park/turn bulb access cover after turning it clockwise by placing the electrical connector on the headlight bulb and locking the housing socket through clockwise rotation. Twist the headlamp bulb access cover clockwise as you reposition the electrical connector into the assembly and place it back on the vehicle. You should attach headlamp assembly bolts then fasten them to 2 n.m torque (18 lb inch settings). Verify the headlamp alignment after closing the hood while making essential changes to the optical system.