Other Name: Trans Mount; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount; Mount, Transmission Mounting
Replaces: 15750514, 15683966, 15022551
Item Weight: 3.90 Pounds
Item Dimensions: 10.2 x 5.4 x 5.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 15113134
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2006 Chevrolet Silverado 3500 Submodels:
Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
Other Name: Mount Assembly-Engine; Engine Mount Bracket; Front Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
Position: Passenger Side
Replaces: 15134284, 15072626
Item Weight: 5.30 Pounds
Item Dimensions: 7.5 x 6.5 x 6.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 15829220
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2006 Chevrolet Silverado 3500 Submodels:
Base, LS, LT, WT | 8 Cyl 6.6 L DIESEL
2006 Chevrolet Silverado 3500 Motor And Transmission Mount
With a comprehensive array of OEM 2006 Chevrolet Silverado 3500 Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Silverado 3500 Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2006 Chevrolet Silverado 3500 Parts Questions & Experts Answers
Q: How to replace the rear Motor and Transmission Mount on the NV 3500 manual transmission on 2006 Chevrolet Silverado 3500?
A: The rear transmission mount replacement process begins by lifting the NV 3500 manual transmission-equipped vehicle and properly supporting it. Start by removing the transmission mount to crossmember nut followed by the transmission mount to transmission bolts. A proper transmission jack should lift the transmission until you can remove the mount before dismantling it. The installation process requires positioning the new transmission mount before installing its transmission bolts to which torque will be applied at 50 Nm (37 ft. lbs.). Lower the transmission using a suitable transmission jack until you can access the transmission mount to crossmember nut. Install the mount and secure it to 40 Nm (30 ft. lbs.). Finally, lower the vehicle.