Other Name: Trans Mount; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount; Mount, Transmission Mounting
Replaces: 15750514, 15683966, 15022551
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2006 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
Other Name: Bracket Assembly; Engine Mount Bracket; Motor Mount; Bracket, Engine Mounting
Position: Driver Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2002 Chevrolet Silverado 3500 | Base, LS, LT | 8 Cyl 6.0 L GAS
Chevrolet Silverado 3500 Motor And Transmission Mount
Our website offers an extensive catalog of genuine Chevrolet Silverado 3500 Motor And Transmission Mount at unbeatable prices. Every OEM Chevrolet Silverado 3500 Motor And Transmission Mount comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Silverado 3500 Motor And Transmission Mount Parts Questions & Experts Answers
Q: How to replace the Motor and Transmission Mount on a 4L80-E/4L85-E automatic transmission on Chevrolet Silverado 3500?
A: The start of 4l80-e/4l85-e automatic transmission transmission mount replacement requires vehicle elevation and support. You need a transmission jack to support the transmission while you remove the transmission mount by disassembling the retaining nut or nuts on the transmission support. You should first elevate the transmission to reduce the weight on the mount before breaking loose the bolts that connect the transmission mount either to the transmission or the transfer case adapter. Raise the transmission only to extract the transmission mount before removing it from the vehicle. Position the new transmission mount onto the vehicle before securing it with the adapter bolts leading to the transmission or transfer case. Tighten these bolts to 50 nm (37 ft. Lbs.). Next lower the transmission before you fix the transmission mount onto the transmission support retaining nut or nuts which should be tightened to 40 nm (30 ft. Lbs.). Follow the process by removing both the transmission jack and lowering the vehicle completely.