How to replace the Crankshaft Position Sensor on 2006 Chevrolet SSR?

To remove the crankshaft position (CKP) sensor, first take off the negative Battery Cable with necessary safety precautions. Raise the vehicle and take out the Starter. Remove the ckp sensor electrical connector and clean the environment around the sensor to ensure that no debris goes into the engine. Put off the ckp sensor retaining fastener and after that, take out the ckp sensor. For installation, reinstall the ckp sensor to its place and then fasten with the retaining fastener which should be tightened to 25 n.m (18 ft, lb). Reconnect the ckp sensor electrical connector, re-install the Starter, lower the vehicle, and reconnect the negative Battery Cable. Finally, follow the ckp system variation learn procedure.

OEM 2006 Chevrolet SSR Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2006 Chevrolet SSR Crankshaft Position Sensor
Part Number: 12560228
$65.79 MSRP: $117.48
You Save: $51.69 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.4 x 2.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12560228
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2006 Chevrolet SSR Crankshaft Position Sensor

With a comprehensive array of OEM 2006 Chevrolet SSR Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet SSR Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet SSR Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2006 Chevrolet SSR?
A: To remove the crankshaft position (CKP) sensor, first take off the negative Battery Cable with necessary safety precautions. Raise the vehicle and take out the Starter. Remove the ckp sensor electrical connector and clean the environment around the sensor to ensure that no debris goes into the engine. Put off the ckp sensor retaining fastener and after that, take out the ckp sensor. For installation, reinstall the ckp sensor to its place and then fasten with the retaining fastener which should be tightened to 25 n.m (18 ft, lb). Reconnect the ckp sensor electrical connector, re-install the Starter, lower the vehicle, and reconnect the negative Battery Cable. Finally, follow the ckp system variation learn procedure.

Related 2006 Chevrolet SSR Parts

Alternate Year Models

2005 Chevrolet SSR Crankshaft Position Sensor