How to camshaft position actuator magnet replacement on 2006 Chevrolet Uplander?

On Buick, Chevrolet, Pontiac, and Saturn models with applicable engines, follow the service bulletin for camshaft position actuator magnet replacement. Use a Torx Plus bit on retention fasteners. Remove intake manifold cover, disconnect magnet connector, unbolt and extract magnet with O-ring; then reinstall O-ring, magnet, bolts to specified torque, reconnect and replace cover.

OEM 2006 Chevrolet Uplander Camshaft

Cam

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshafts found

View related parts
2006 Chevrolet Uplander Camshaft Part Number: 12567117
Product Specifications
- Other Name: Camshaft, Engine
- Item Weight: 5.30 Pounds
- Item Dimensions: 28.1 x 3.3 x 3.3 inches
- Condition: New
- SKU: 12567117
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS
View related parts
2006 Chevrolet Uplander Camshaft Part Number: 12591843
Product Specifications
- Item Weight: 6.60 Pounds
- Item Dimensions: 25.0 x 3.5 x 3.4 inches
- Condition: New
- SKU: 12591843
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2006 Chevrolet Uplander Camshaft

With a comprehensive array of OEM 2006 Chevrolet Uplander Camshaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Uplander Camshaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Uplander Camshaft Parts and Q&A

Q: How to camshaft position actuator magnet replacement on 2006 Chevrolet Uplander?
A: On Buick, Chevrolet, Pontiac, and Saturn models with applicable engines, follow the service bulletin for camshaft position actuator magnet replacement. Use a Torx Plus bit on retention fasteners. Remove intake manifold cover, disconnect magnet connector, unbolt and extract magnet with O-ring; then reinstall O-ring, magnet, bolts to specified torque, reconnect and replace cover.