Make sure this part fits

GM 12567117
Camshaft

2003-2007 GM

Customer Questions & Expert Answers (5)
GM 12567117 Camshaft
  • Part Description
    Camshaft, Engine
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2003-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS
    2005-2006 Chevrolet EquinoxLS, LT6 Cyl 3.4 L GAS
    2003-2005 Chevrolet ImpalaBase6 Cyl 3.4 L GAS
    2003-2006 Chevrolet MalibuBase, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ6 Cyl 3.1 L GAS, 6 Cyl 3.5 L GAS
    2003-2005 Chevrolet Monte CarloLS, LS Competition, LS Sport6 Cyl 3.4 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS
    2003-2005 Chevrolet VentureLS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2003-2004 Oldsmobile AleroGL, GLS6 Cyl 3.4 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12567117 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12567117 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to install the camshaft on Buick Rendezvous? Posted by Customer
    A:
    A clean oil coating needs to be applied to the Camshaft journals while gm p/n 12345501 (Canadian P/N 992704) or an equivalent product should be used on the Camshaft lobes. Start the installation process by putting in the Camshaft sprocket bolt onto the Camshaft while keeping it only finger tight. Begin inserting the Camshaft into the Camshaft bearings while applying gentle rotational motion. The installation requires fitting the Camshaft thrust plate before tightening its screws to 10 n.m (89 lb in). The last step includes installing the Camshaft Position Sensor along with its bolt while setting torque to 10 n.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the intake manifold cover for the 2006 Buick Terraza? Posted by Customer
    A:
    Disconnect the camshaft position actuator magnet electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done for installation after removing the components for the 2004 Chevrolet Malibu? Posted by Customer
    A:
    Lubricate the valve tips and install the hydraulic element lash adjusters followed by the camshaft roller followers, ensuring the alignment notches are aligned with the camshaft sprocket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the installation process for the new magnet for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    First, place the O-ring seal and magnet, then install the magnet bolts, tightening them to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Camshaft 12567117 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12567117 Camshaft is available in the market under the name GM Camshaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12567117 Camshaft fits certain Chevrolet Malibu, Equinox, Impala models, as well as Buick Century, Rendezvous, Terraza. Additionally, it is compatible with Pontiac G6, Grand Prix, Grand Am and Oldsmobile Alero, Silhouette models.
The original GM component designated by manufacturer part number 12567117 maintains top performance when functioning as the Camshaft, Engine unit. The component 12567117 is constructed from durable material and its dimensions span 28.1 x 3.3 x 3.3 inches while weighing 5.30 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. The part 12567117 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.